| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | sponge absorb |
| Return Type: | Block |
The blocks absorbed by a sponge block.
Examples:
the absorbed blocks
| Patterns: |
|
| Since: | 2.8.0 |
| Requirements: | Paper |
| Return Type: | Item |
Returns the item the entities are currently using (ie: the food they're eating, the bow they're drawing back, etc.). This cannot be changed. If an entity is not using any item, this will return null.
Examples:
on damage of player:
if victim's active tool is a bow:
interrupt player's active item use
if victim's active tool is a bow:
interrupt player's active item use
| Patterns: |
|
| Since: | 2.8.0 |
| Requirements: | Paper |
| Return Type: | Timespan |
Returns the time that the entities have either spent using an item, or the time left for them to finish using an item.
If an entity is not using any item, this will return 0 seconds.
If an entity is not using any item, this will return 0 seconds.
Examples:
on right click:
broadcast player's remaining item use time
wait 1 second
broadcast player's item use time
broadcast player's remaining item use time
wait 1 second
broadcast player's item use time
| Patterns: |
|
| Since: | 2.4 |
| Return Type: | Living Entity |
The affected entities in the area cloud effect event.
Examples:
on area cloud effect:
loop affected entities:
if loop-value is a player:
send "WARNING: you've step on an area effect cloud!" to loop-value
loop affected entities:
if loop-value is a player:
send "WARNING: you've step on an area effect cloud!" to loop-value
| Patterns: | |
| Since: | 2.7 |
| Return Type: |
Returns the age or maximum age of blocks and age for entities (there in no maximum age for entities).
For blocks, 'Age' represents the different growth stages that a crop-like block can go through. A value of 0 indicates that the crop was freshly planted, whilst a value equal to 'maximum age' indicates that the crop is ripe and ready to be harvested.
For entities, 'Age' represents the time left for them to become adults and it's in minus increasing to be 0 which means they're adults, e.g. A baby cow needs 20 minutes to become an adult which equals to 24,000 ticks so their age will be -24000 once spawned.
For blocks, 'Age' represents the different growth stages that a crop-like block can go through. A value of 0 indicates that the crop was freshly planted, whilst a value equal to 'maximum age' indicates that the crop is ripe and ready to be harvested.
For entities, 'Age' represents the time left for them to become adults and it's in minus increasing to be 0 which means they're adults, e.g. A baby cow needs 20 minutes to become an adult which equals to 24,000 ticks so their age will be -24000 once spawned.
Examples:
# Set targeted crop to fully grown crop
set age of targeted block to maximum age of targeted block
# Spawn a baby cow that will only need 1 minute to become an adult
spawn a baby cow at player
set age of last spawned entity to -1200 # in ticks = 60 seconds
set age of targeted block to maximum age of targeted block
# Spawn a baby cow that will only need 1 minute to become an adult
spawn a baby cow at player
set age of last spawned entity to -1200 # in ticks = 60 seconds
| Patterns: |
|
| Since: | 2.7 |
| Return Type: | Object |
Obtains the list of all banned players or IP addresses.
Examples:
command /banlist:
trigger:
send all the banned players
trigger:
send all the banned players
| Patterns: |
|
| Since: | 2.2-dev35 |
| Requirements: | Vault, a permission plugin that supports Vault |
| Return Type: | Text |
All the groups a player can have. This expression requires Vault and a compatible permissions plugin to be installed.
Examples:
command /group <text>:
trigger:
if argument is "list":
send "%all groups%"
trigger:
if argument is "list":
send "%all groups%"
| Patterns: |
|
| Since: | 2.7 |
| Return Type: | Offline Player |
The list of operators on the server.
Examples:
set {_ops::*} to all operators
| Patterns: | |
| Since: | 2.2-dev33 |
| Return Type: | Text |
Returns all permissions of the defined player(s). Note that the modifications to resulting list do not actually change permissions.
Examples:
set {_permissions::*} to all permissions of the player
| Patterns: |
|
| Since: | 2.5 |
| Return Type: | Text |
Returns all of the scripts, or just the enabled or disabled ones.
Examples:
command /scripts:
trigger:
send "All Scripts: %scripts%" to player
send "Loaded Scripts: %enabled scripts%" to player
send "Unloaded Scripts: %disabled scripts%" to player
trigger:
send "All Scripts: %scripts%" to player
send "Loaded Scripts: %enabled scripts%" to player
send "Unloaded Scripts: %disabled scripts%" to player
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Script |
Returns all of the scripts, or just the enabled or disabled ones.
Examples:
command /scripts:
trigger:
send "All Scripts: %scripts%" to player
send "Loaded Scripts: %enabled scripts%" to player
send "Unloaded Scripts: %disabled scripts%" to player
trigger:
send "All Scripts: %scripts%" to player
send "Loaded Scripts: %enabled scripts%" to player
send "Unloaded Scripts: %disabled scripts%" to player
| Patterns: |
|
| Since: | 2.10 |
| Requirements: | Paper (paper tags) |
| Return Type: | Minecraft Tag |
Returns all the tags.
`minecraft tag` will return only the vanilla tags, `datapack tag` will return only datapack-provided tags, `paper tag` will return only Paper's custom tags (if you are running Paper), and `custom tag` will look in the "skript" namespace for custom tags you've registered.
You can also filter by tag types using "item", "block", or "entity".
`minecraft tag` will return only the vanilla tags, `datapack tag` will return only datapack-provided tags, `paper tag` will return only Paper's custom tags (if you are running Paper), and `custom tag` will look in the "skript" namespace for custom tags you've registered.
You can also filter by tag types using "item", "block", or "entity".
Examples:
broadcast minecraft tags
send paper entity tags
broadcast all block tags
send paper entity tags
broadcast all block tags
| Patterns: |
|
| Since: | 2.6 |
| Return Type: | Text |
Returns all registered commands or all script commands.
Examples:
send "Number of all commands: %size of all commands%"
send "Number of all script commands: %size of all script commands%"
send "Number of all script commands: %size of all script commands%"
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Timespan |
The cooldown time until an allay can duplicate again naturally.
Resetting the cooldown time will set the cooldown time to the same amount of time after an allay has duplicated.
Resetting the cooldown time will set the cooldown time to the same amount of time after an allay has duplicated.
Examples:
set {_time} to the duplicate cooldown of last spawned allay
add 5 seconds to the duplication cool down time of last spawned allay
remove 3 seconds from the duplicating cooldown time of last spawned allay
clear the clone cool down of last spawned allay
reset the cloning cool down time of last spawned allay
add 5 seconds to the duplication cool down time of last spawned allay
remove 3 seconds from the duplicating cooldown time of last spawned allay
clear the clone cool down of last spawned allay
reset the cloning cool down time of last spawned allay
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Location |
The location of the jukebox an allay is set to.
Examples:
set {_loc} to the target jukebox of last spawned allay
| Patterns: | |
| Since: | 2.10 |
| Return Type: |
The alpha, red, green, or blue value of colors. Ranges from 0 to 255.
Alpha represents opacity.
Alpha represents opacity.
Examples:
broadcast red value of rgb(100, 0, 50) # sends '100'
set {_red} to red's red value + 10
set {_red} to red's red value + 10
| Patterns: | |
| Since: | 1.4.3 |
| Return Type: | Number |
Effectively an alias of 'y-coordinate of …', it represents the height of some location within the world.
Examples:
on damage: altitude of the attacker is higher than the altitude of the victim set damage to damage * 1.2
| Patterns: |
|
| Since: | 1.0 |
| Return Type: | Number |
The amount or size of something.
Please note that
Also, you can get the recursive size of a list, which will return the recursive size of the list with sublists included, e.g.
Where using %size of {list::*}% will only return 3 (the first layer of indices only), while %recursive size of {list::*}% will return 6 (the entire list)
Please note that getting a list's recursive size can cause lag if the list is large, so only use this expression if you need to!
Please note that
amount of %items% will not return the number of items, but the number of stacks, e.g. 1 for a stack of 64 torches. To get the amount of items in a stack, see the item amount expression.Also, you can get the recursive size of a list, which will return the recursive size of the list with sublists included, e.g.
{list::*} Structure
├──── {list::1}: 1
├──── {list::2}: 2
│ ├──── {list::2::1}: 3
│ │ └──── {list::2::1::1}: 4
│ └──── {list::2::2}: 5
└──── {list::3}: 6
Where using %size of {list::*}% will only return 3 (the first layer of indices only), while %recursive size of {list::*}% will return 6 (the entire list)
Please note that getting a list's recursive size can cause lag if the list is large, so only use this expression if you need to!
Examples:
message "There are %number of all players% players online!"
| Patterns: |
|
| Since: | 2.0 |
| Return Type: |
Counts how many of a particular item type are in a given inventory.
Examples:
message "You have %number of tag values of minecraft tag "diamond_ores" in the player's inventory% diamond ores in your inventory."
| Patterns: |
|
| Since: | 2.12 |
| Return Type: | Timespan |
Represents a timespan with an infinite duration. An eternity is also created when arithmetic results in a timespan larger than about 292 million years.
Infinite timespans generally follow the rules of infinity, where most math operations do nothing. However, operations that would return NaN with numbers will instead return a timespan of 0 seconds.
Note that an eternity will often be treated as the longest duration something supports, rather than a true eternity.
Infinite timespans generally follow the rules of infinity, where most math operations do nothing. However, operations that would return NaN with numbers will instead return a timespan of 0 seconds.
Note that an eternity will often be treated as the longest duration something supports, rather than a true eternity.
Examples:
set fire to the player for an eternity
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Number |
Represents the passed number value in degrees.
If radians is specified, converts the passed value to degrees. This conversion may not be entirely accurate, due to floating point precision.
If radians is specified, converts the passed value to degrees. This conversion may not be entirely accurate, due to floating point precision.
Examples:
set {_angle} to 90 degrees
{_angle} is 90 # true
180 degrees is pi # true
pi radians is 180 degrees # true
{_angle} is 90 # true
180 degrees is pi # true
pi radians is 180 degrees # true
| Patterns: |
|
| Since: | 2.8.0 |
| Return Type: |
Returns the experience cost (in levels) to complete the current repair or the maximum experience cost (in levels) to be allowed by the current repair.
The default value of max cost set by vanilla Minecraft is 40.
The default value of max cost set by vanilla Minecraft is 40.
Examples:
on inventory click:
if {AnvilRepairSaleActive} = true:
wait a tick # recommended, to avoid client bugs
set anvil repair cost to anvil repair cost * 50%
send "Anvil repair sale is ON!" to player
on inventory click:
player have permission "anvil.repair.max.bypass"
set max repair cost of event-inventory to 99999
if {AnvilRepairSaleActive} = true:
wait a tick # recommended, to avoid client bugs
set anvil repair cost to anvil repair cost * 50%
send "Anvil repair sale is ON!" to player
on inventory click:
player have permission "anvil.repair.max.bypass"
set max repair cost of event-inventory to 99999
| Patterns: |
|
| Since: | 2.7 |
| Return Type: | Text |
An expression to get the name to be applied to an item in an anvil inventory.
Examples:
on inventory click:
type of event-inventory is anvil inventory
if the anvil text input of the event-inventory is "FREE OP":
ban player
type of event-inventory is anvil inventory
if the anvil text input of the event-inventory is "FREE OP":
ban player
| Patterns: |
|
| Since: | Unknown |
| Return Type: | Object |
Returns an 'or list' composed of the given objects. For example, `any of (1, 2, and 3)` is equivalent to `1, 2, or 3`
Useful when doing comparisons with variable lists.
Useful when doing comparisons with variable lists.
Examples:
if any of {_numbers::*} are 1:
if any of {teamA::*} are within location(0, 0, 0) and location(10, 10, 10):
if any of {teamA::*} are within location(0, 0, 0) and location(10, 10, 10):
| Patterns: |
|
| Since: | 2.10 |
| Usable in events: | Beacon Effect |
| Requirements: | Paper |
| Return Type: | Potion Effect Type |
The type of effect applied by a beacon.
Examples:
on beacon effect:
if the applied effect is primary beacon effect:
broadcast "Is Primary"
else if applied effect = secondary effect:
broadcast "Is Secondary"
if the applied effect is primary beacon effect:
broadcast "Is Primary"
else if applied effect = secondary effect:
broadcast "Is Secondary"
| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | enchant |
| Return Type: | Enchantment Type |
The applied enchantments in an enchant event.
Deleting or removing the applied enchantments will prevent the item's enchantment.
Deleting or removing the applied enchantments will prevent the item's enchantment.
Examples:
on enchant:
set the applied enchantments to sharpness 10 and fire aspect 5
set the applied enchantments to sharpness 10 and fire aspect 5
| Patterns: | |
| Since: | 1.0, 2.7 (support for command events) |
| Return Type: | Object |
Usable in script commands and command events. Holds the value of an argument given to the command, e.g. if the command "/tell <player> <text>" is used like "/tell Njol Hello Njol!" argument 1 is the player named "Njol" and argument 2 is "Hello Njol!".
One can also use the type of the argument instead of its index to address the argument, e.g. in the above example 'player-argument' is the same as 'argument 1'.
Please note that specifying the argument type is only supported in script commands.
One can also use the type of the argument instead of its index to address the argument, e.g. in the above example 'player-argument' is the same as 'argument 1'.
Please note that specifying the argument type is only supported in script commands.
Examples:
give the item-argument to the player-argument
damage the player-argument by the number-argument
give a diamond pickaxe to the argument
add argument 1 to argument 2
heal the last argument
damage the player-argument by the number-argument
give a diamond pickaxe to the argument
add argument 1 to argument 2
heal the last argument
| Patterns: |
|
| Since: | 1.4.2 |
| Return Type: | Object |
Arithmetic expressions, e.g. 1 + 2, (health of player - 2) / 3, etc.
Examples:
set the player's health to 10 - the player's health
loop (argument + 2) / 5 times:
message "Two useless numbers: %loop-num * 2 - 5%, %2^loop-num - 1%"
message "You have %health of player * 2% half hearts of HP!"
loop (argument + 2) / 5 times:
message "Two useless numbers: %loop-num * 2 - 5%, %2^loop-num - 1%"
message "You have %health of player * 2% half hearts of HP!"
| Patterns: |
|
| Since: | 2.11 |
| Usable in events: | Armor Change |
| Requirements: | Paper |
| Return Type: | Item |
Get the unequipped or equipped armor item from a 'armor change' event.
Examples:
on armor change broadcast the old armor item
| Patterns: |
|
| Since: | 1.0, 2.8.0 (armor), 2.10 (body armor), 2.12 (saddle) |
| Return Type: | Slot |
Equipment of living entities, i.e. the boots, leggings, chestplate or helmet.
Body armor is a special slot that can only be used for:
Saddle is a special slot that can only be used for: pigs, striders and horse types (horse, camel, llama, mule, donkey).
Body armor is a special slot that can only be used for:
- Horses: Horse armour (doesn't work on zombie or skeleton horses)
- Wolves: Wolf Armor
- Llamas (regular or trader): Carpet
Saddle is a special slot that can only be used for: pigs, striders and horse types (horse, camel, llama, mule, donkey).
Examples:
set chestplate of the player to a diamond chestplate
helmet of player is neither tag values of tag "paper:helmets" nor air # player is wearing a block, e.g. from another plugin
helmet of player is neither tag values of tag "paper:helmets" nor air # player is wearing a block, e.g. from another plugin
| Patterns: |
|
| Since: | 2.8.0, 2.12 (multiple blocks) |
| Requirements: | Paper 1.21.4+ (multiple blocks) |
| Return Type: | Block |
Returns the attached block of an arrow.
If running Paper 1.21.4+, the plural version of the expression should be used as it is more reliable compared to the single version.
If running Paper 1.21.4+, the plural version of the expression should be used as it is more reliable compared to the single version.
Examples:
set hit block of last shot arrow to diamond block
on projectile hit: wait 1 tick break attached blocks of event-projectile kill event-projectile
on projectile hit: wait 1 tick break attached blocks of event-projectile kill event-projectile
| Patterns: |
|
| Since: | 2.5.1 |
| Return Type: |
An arrow's knockback strength.
Examples:
on shoot:
event-projectile is an arrow
set arrow knockback strength of event-projectile to 10
event-projectile is an arrow
set arrow knockback strength of event-projectile to 10
| Patterns: |
|
| Since: | 2.5 |
| Return Type: |
The number of arrows stuck in a living entity.
Examples:
set arrows stuck in player to 5
| Patterns: | |
| Since: | 2.6.1 |
| Requirements: | Minecraft 1.15+ |
| Return Type: |
Returns the current cooldown for a player's attack. This is used to calculate damage, with 1.0 representing a fully charged attack and 0.0 representing a non-charged attack.
NOTE: Currently this can not be set to anything.
NOTE: Currently this can not be set to anything.
Examples:
on damage:
if attack cooldown of attacker < 1:
set damage to 0
send "Your hit was too weak! wait until your weapon is fully charged next time." to attacker
if attack cooldown of attacker < 1:
set damage to 0
send "Your hit was too weak! wait until your weapon is fully charged next time." to attacker
| Patterns: |
|
| Since: | 1.3, 2.6.1 (projectile hit event) |
| Usable in events: | damage, death, projectile hit |
| Return Type: | Entity |
The victim of a damage event, e.g. when a player attacks a zombie this expression represents the zombie. When using Minecraft 1.11+, this also covers the hit entity in a projectile hit event.
Examples:
on damage:
victim is a creeper
damage the attacked by 1 heart
victim is a creeper
damage the attacked by 1 heart
| Patterns: |
|
| Since: | 1.3 |
| Usable in events: | damage, death, destroy |
| Return Type: | Entity |
The attacker of a damage event, e.g. when a player attacks a zombie this expression represents the player.
Please note that the attacker can also be a block, e.g. a cactus or lava, but this expression will not be set in these cases.
Please note that the attacker can also be a block, e.g. a cactus or lava, but this expression will not be set in these cases.
Examples:
on damage:
attacker is a player
health of attacker is less than or equal to 2
damage victim by 1 heart
attacker is a player
health of attacker is less than or equal to 2
damage victim by 1 heart
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Banner Pattern |
Creates a new banner pattern.
Examples:
set {_pattern} to a creeper banner pattern colored red
add {_pattern} to banner patterns of {_banneritem}
remove {_pattern} from banner patterns of {_banneritem}
set the 1st banner pattern of block at location(0,0,0) to {_pattern}
clear the 1st banner pattern of block at location(0,0,0)
add {_pattern} to banner patterns of {_banneritem}
remove {_pattern} from banner patterns of {_banneritem}
set the 1st banner pattern of block at location(0,0,0) to {_pattern}
clear the 1st banner pattern of block at location(0,0,0)
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Item Type |
Gets the item from a banner pattern type.
Note that not all banner pattern types have an item.
Note that not all banner pattern types have an item.
Examples:
set {_item} to creeper charged banner pattern item
set {_item} to snout banner pattern item
set {_item} to thing banner pattern item
set {_item} to snout banner pattern item
set {_item} to thing banner pattern item
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Banner Pattern |
Gets or sets the banner patterns of a banner.
In order to set a specific position of a banner, there needs to be that many patterns already on the banner.
This expression will add filler patterns to the banner to allow the specified position to be set.
For Example, setting the 3rd banner pattern of a banner that has no patterns on it, will internally add 3 base patterns, allowing the 3rd banner pattern to be set.
In order to set a specific position of a banner, there needs to be that many patterns already on the banner.
This expression will add filler patterns to the banner to allow the specified position to be set.
For Example, setting the 3rd banner pattern of a banner that has no patterns on it, will internally add 3 base patterns, allowing the 3rd banner pattern to be set.
Examples:
broadcast banner patterns of {_banneritem}
broadcast 1st banner pattern of block at location(0,0,0)
clear banner patterns of {_banneritem}
broadcast 1st banner pattern of block at location(0,0,0)
clear banner patterns of {_banneritem}
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Item Type |
The items dropped by the piglin in a piglin bartering event.
Examples:
on piglin barter:
if the bartering drops contain a jack o lantern:
remove jack o lantern from bartering output
broadcast "it's not halloween yet!"
if the bartering drops contain a jack o lantern:
remove jack o lantern from bartering output
broadcast "it's not halloween yet!"
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Item Type |
The item picked up by the piglin in a piglin bartering event.
Examples:
on piglin barter:
if the bartering input is a gold ingot:
broadcast "my precious..."
if the bartering input is a gold ingot:
broadcast "my precious..."
| Patterns: | |
| Since: | 2.10 |
| Usable in events: | Beacon Effect, Beacon Toggle, Beacon Change Effect |
| Return Type: | Potion Effect Type |
The active effects of a beacon.
The secondary effect can be set to anything, but the icon in the GUI will not display correctly.
The secondary effect can only be set when the beacon is at max tier.
The primary and secondary effect can not be the same, primary will always retain the potion type and secondary will be cleared.
The secondary effect can be set to anything, but the icon in the GUI will not display correctly.
The secondary effect can only be set when the beacon is at max tier.
The primary and secondary effect can not be the same, primary will always retain the potion type and secondary will be cleared.
Examples:
set primary beacon effect of {_block} to haste set secondary effect of {_block} to resistance
| Patterns: |
|
| Since: | 2.0, 2.7 (offlineplayers, safe bed) |
| Return Type: | Location |
Returns the bed location of a player, i.e. the spawn point of a player if they ever slept in a bed and the bed still exists and is unobstructed however, you can set the unsafe bed location of players and they will respawn there even if it has been obstructed or doesn't exist anymore and that's the default behavior of this expression otherwise you will need to be specific i.e.
NOTE: Offline players can not have their bed location changed, only online players.
safe bed location.NOTE: Offline players can not have their bed location changed, only online players.
Examples:
if bed of player exists:
teleport player the the player's bed
else:
teleport the player to the world's spawn point
set the bed location of player to spawn location of world("world") # unsafe/invalid bed location
set the safe bed location of player to spawn location of world("world") # safe/valid bed location
teleport player the the player's bed
else:
teleport the player to the world's spawn point
set the bed location of player to spawn location of world("world") # unsafe/invalid bed location
set the safe bed location of player to spawn location of world("world") # safe/valid bed location
| Patterns: | |
| Since: | 1.4.4, 2.6.1 (3D biomes) |
| Return Type: | Biome |
The biome at a certain location. Please note that biomes are only defined for x/z-columns
(i.e. the altitude (y-coordinate) doesn't matter), up until Minecraft 1.15.x.
As of Minecraft 1.16, biomes are now 3D (per block vs column).
(i.e. the altitude (y-coordinate) doesn't matter), up until Minecraft 1.15.x.
As of Minecraft 1.16, biomes are now 3D (per block vs column).
Examples:
# damage player in deserts constantly
every real minute:
loop all players:
biome at loop-player is desert
damage the loop-player by 1
every real minute:
loop all players:
biome at loop-player is desert
damage the loop-player by 1
| Patterns: |
|
| Since: | 1.0 |
| Return Type: | Block |
The block involved in the event, e.g. the clicked block or the placed block.
Can optionally include a direction as well, e.g. 'block above' or 'block in front of the player'.
Can optionally include a direction as well, e.g. 'block above' or 'block in front of the player'.
Examples:
block is iron ore
set block below to air
spawn a creeper above the block
loop blocks in radius 4:
loop-block is obsidian
set loop-block to water
block is a chest:
clear the inventory of the block
set block below to air
spawn a creeper above the block
loop blocks in radius 4:
loop-block is obsidian
set loop-block to water
block is a chest:
clear the inventory of the block
| Patterns: | |
| Since: | 1.0 |
| Return Type: | Block |
The block involved in the event, e.g. the clicked block or the placed block.
Can optionally include a direction as well, e.g. 'block above' or 'block in front of the player'.
Can optionally include a direction as well, e.g. 'block above' or 'block in front of the player'.
Examples:
block is iron ore
set block below to air
spawn a creeper above the block
loop blocks in radius 4:
loop-block is obsidian
set loop-block to water
block is a chest:
clear the inventory of the block
set block below to air
spawn a creeper above the block
loop blocks in radius 4:
loop-block is obsidian
set loop-block to water
block is a chest:
clear the inventory of the block
| Patterns: | |
| Since: | 2.7 |
| Requirements: | 1.17+ |
| Return Type: |
Gets the speed at which the given player would break this block, taking into account tools, potion effects, whether or not the player is in water, enchantments, etc. The returned value is the amount of progress made in breaking the block each tick. When the total breaking progress reaches 1.0, the block is broken. Note that the break speed can change in the course of breaking a block, e.g. if a potion effect is applied or expires, or the player jumps/enters water.
Examples:
on left click using diamond pickaxe:
event-block is set
send "Break Speed: %break speed for player%" to player
event-block is set
send "Break Speed: %break speed for player%" to player
| Patterns: | |
| Since: | 2.5, 2.5.2 (set), 2.10 (block displays) |
| Return Type: | Block Data |
Get the block data associated with a block.
This data can also be used to set blocks.
This data can also be used to set blocks.
Examples:
set {_data} to block data of target block
set block at player to {_data}
set block data of target block to oak_stairs[facing=south;waterlogged=true]
set block at player to {_data}
set block data of target block to oak_stairs[facing=south;waterlogged=true]
| Patterns: |
|
| Since: | 2.6 |
| Requirements: | Minecraft 1.13+ |
| Return Type: | Number |
Obtains the block's hardness level (also known as "strength"). This number is used to calculate the time required to break each block.
Examples:
set {_hard} to block hardness of target block
if block hardness of target block > 5:
if block hardness of target block > 5:
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Text |
Gets the sound that a given block, blockdata, or itemtype will use in a specific scenario.
This will return a string in the form of "SOUND_EXAMPLE", which can be used in the play sound syntax.
Check out this website for a list of sounds in Minecraft, or this one to go to the Sounds wiki page.
This will return a string in the form of "SOUND_EXAMPLE", which can be used in the play sound syntax.
Check out this website for a list of sounds in Minecraft, or this one to go to the Sounds wiki page.
Examples:
play sound (break sound of dirt) at all players
set {_sounds::*} to place sounds of dirt, grass block, blue wool and stone
set {_sounds::*} to place sounds of dirt, grass block, blue wool and stone
| Patterns: | |
| Since: | 1.0 |
| Return Type: | Block |
All blocks in a sphere around a center, mostly useful for looping.
Examples:
loop blocks in radius 5 around the player:
set loop-block to air
set loop-block to air
| Patterns: |
|
| Since: | 1.0, 2.5.1 (within/cuboid/chunk) |
| Return Type: | Block |
Blocks relative to other blocks or between other blocks.
Can be used to get blocks relative to other blocks or for looping.
Blocks from/to and between will return a straight line whereas blocks within will return a cuboid.
Can be used to get blocks relative to other blocks or for looping.
Blocks from/to and between will return a straight line whereas blocks within will return a cuboid.
Examples:
loop blocks above the player:
loop blocks between the block below the player and the targeted block:
set the blocks below the player, the victim and the targeted block to air
set all blocks within {loc1} and {loc2} to stone
set all blocks within chunk at player to air
loop blocks between the block below the player and the targeted block:
set the blocks below the player, the victim and the targeted block to air
set all blocks within {loc1} and {loc2} to stone
set all blocks within chunk at player to air
| Patterns: |
|
| Since: | 2.1 |
| Requirements: | Supported regions plugin |
| Return Type: | Block |
All blocks in a region.
This expression requires a supported regions plugin to be installed.
This expression requires a supported regions plugin to be installed.
Examples:
loop all blocks in the region {arena.%{faction.%player%}%}:
clear the loop-block
clear the loop-block
| Patterns: |
|
| Since: | 2.2-dev31 |
| Return Type: | Text |
The author of a book.
Examples:
on book sign:
message "Book Title: %author of event-item%"
message "Book Title: %author of event-item%"
| Patterns: |
|
| Since: | 2.2-dev31, 2.7 (changers) |
| Return Type: | Text |
The pages of a book (Supports Skript's chat format)
Note: In order to modify the pages of a new written book, you must have the title and author
of the book set. Skript will do this for you, but if you want your own, please set those values.
Note: In order to modify the pages of a new written book, you must have the title and author
of the book set. Skript will do this for you, but if you want your own, please set those values.
Examples:
on book sign:
message "Book Pages: %pages of event-item%"
message "Book Page 1: %page 1 of event-item%"
set page 1 of player's held item to "Book writing"
message "Book Pages: %pages of event-item%"
message "Book Page 1: %page 1 of event-item%"
set page 1 of player's held item to "Book writing"
| Patterns: |
|
| Since: | 2.2-dev31 |
| Return Type: | Text |
The title of a book.
Examples:
on book sign:
message "Book Title: %title of event-item%"
message "Book Title: %title of event-item%"
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Living Entity |
Represents family members within a breeding event.
Examples:
on breeding:
send "When a %breeding mother% and %breeding father% love each other very much, they make a %bred offspring%" to breeder
send "When a %breeding mother% and %breeding father% love each other very much, they make a %bred offspring%" to breeder
| Patterns: | |
| Since: | 2.12 |
| Requirements: | Minecraft 1.20+ |
| Return Type: | Item |
Represents the item that is uncovered when dusting.
The only blocks that can currently be "dusted" are Suspicious Gravel and Suspicious Sand.
The only blocks that can currently be "dusted" are Suspicious Gravel and Suspicious Sand.
Examples:
send target block's brushable item
set {_gravel}'s brushable item to emerald
set {_gravel}'s brushable item to emerald
| Patterns: |
|
| Since: | 2.2-dev16 (lowercase and uppercase), 2.5 (advanced cases) |
| Return Type: | Text |
Copy of given text in Lowercase, Uppercase, Proper Case, camelCase, PascalCase, Snake_Case, and Kebab-Case
Examples:
"Oops!" in lowercase # oops!
"oops!" in uppercase # OOPS!
"hellO i'm steve!" in proper case # HellO I'm Steve!
"hellO i'm steve!" in strict proper case # Hello I'm Steve!
"spAwn neW boSs ()" in camel case # spAwnNeWBoSs()
"spAwn neW boSs ()" in strict camel case # spawnNewBoss()
"geneRate ranDom numBer ()" in pascal case # GeneRateRanDomNumBer()
"geneRate ranDom numBer ()" in strict pascal case # GenerateRandomNumber()
"Hello Player!" in snake case # Hello_Player!
"Hello Player!" in lower snake case # hello_player!
"Hello Player!" in upper snake case # HELLO_PLAYER!
"What is your name?" in kebab case # What-is-your-name?
"What is your name?" in lower kebab case # what-is-your-name?
"What is your name?" in upper kebab case # WHAT-IS-YOUR-NAME?
"oops!" in uppercase # OOPS!
"hellO i'm steve!" in proper case # HellO I'm Steve!
"hellO i'm steve!" in strict proper case # Hello I'm Steve!
"spAwn neW boSs ()" in camel case # spAwnNeWBoSs()
"spAwn neW boSs ()" in strict camel case # spawnNewBoss()
"geneRate ranDom numBer ()" in pascal case # GeneRateRanDomNumBer()
"geneRate ranDom numBer ()" in strict pascal case # GenerateRandomNumber()
"Hello Player!" in snake case # Hello_Player!
"Hello Player!" in lower snake case # hello_player!
"Hello Player!" in upper snake case # HELLO_PLAYER!
"What is your name?" in kebab case # What-is-your-name?
"What is your name?" in lower kebab case # what-is-your-name?
"What is your name?" in upper kebab case # WHAT-IS-YOUR-NAME?
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Location |
The center of a world border.
Examples:
set world border center of {_worldborder} to location(10, 0, 20)
| Patterns: | |
| Since: | 2.9.0 |
| Return Type: |
Returns the Unicode codepoint of a character
Examples:
function is_in_order(letters: strings) :: boolean:
loop {_letters::*}:
set {_codepoint} to codepoint of lowercase loop-value
return false if {_codepoint} is not set # 'loop-value is not a single character'
if:
{_previous-codepoint} is set
# if the codepoint of the current character is not
# 1 more than the codepoint of the previous character
# then the letters are not in order
{_codepoint} - {_previous-codepoint} is not 1
then:
return false
set {_previous-codepoint} to {_codepoint}
return true
loop {_letters::*}:
set {_codepoint} to codepoint of lowercase loop-value
return false if {_codepoint} is not set # 'loop-value is not a single character'
if:
{_previous-codepoint} is set
# if the codepoint of the current character is not
# 1 more than the codepoint of the previous character
# then the letters are not in order
{_codepoint} - {_previous-codepoint} is not 1
then:
return false
set {_previous-codepoint} to {_codepoint}
return true
| Patterns: |
|
| Since: | 2.9.0 |
| Return Type: | Text |
Returns the character at the specified codepoint
Examples:
function chars_between(lower: string, upper: string) :: strings:
set {_lower} to codepoint of {_lower}
return {_none} if {_lower} is not set
set {_upper} to codepoint of {_upper}
return {_none} if {_upper} is not set
loop integers between {_lower} and {_upper}:
add character from codepoint loop-value to {_chars::*}
return {_chars::*}
set {_lower} to codepoint of {_lower}
return {_none} if {_lower} is not set
set {_upper} to codepoint of {_upper}
return {_none} if {_upper} is not set
loop integers between {_lower} and {_upper}:
add character from codepoint loop-value to {_chars::*}
return {_chars::*}
| Patterns: | |
| Since: | 2.8.0 |
| Return Type: | Text |
All characters between two given characters, useful for generating random strings. This expression uses the Unicode numerical code of a character to determine which characters are between the two given characters. The ASCII table linked here shows this ordering for the first 256 characters.
If you would like only alphanumeric characters you can use the 'alphanumeric' option in the expression.
If strings of more than one character are given, only the first character of each is used.
If you would like only alphanumeric characters you can use the 'alphanumeric' option in the expression.
If strings of more than one character are given, only the first character of each is used.
Examples:
loop characters from "a" to "f":
broadcast "%loop-value%"
# 0123456789:;<=>?@ABC... ...uvwxyz
send characters between "0" and "z"
# 0123456789ABC... ...uvwxyz
send alphanumeric characters between "0" and "z"
broadcast "%loop-value%"
# 0123456789:;<=>?@ABC... ...uvwxyz
send characters between "0" and "z"
# 0123456789ABC... ...uvwxyz
send alphanumeric characters between "0" and "z"
| Patterns: |
|
| Since: | 2.2-dev31 |
| Return Type: | Text |
Can be used to get/retrieve the chat format. The sender of a message is represented by [player] or [sender], and the message by [message] or [msg].
Examples:
set the chat format to "<yellow>[player]<light gray>: <green>[message]"
| Patterns: |
|
| Since: | 2.2-Fixes-v7, 2.2-dev35 (clearing recipients) |
| Return Type: | Player |
Recipients of chat events where this is called.
Examples:
chat recipients
| Patterns: |
|
| Since: | 2.0, 2.8.0 (loaded chunks) |
| Return Type: | Chunk |
Returns the chunk of a block, location or entity is in, or a list of the loaded chunks of a world.
Examples:
add the chunk at the player to {protected chunks::*}
set {_chunks::*} to the loaded chunks of the player's world
set {_chunks::*} to the loaded chunks of the player's world
| Patterns: |
|
| Since: | 1.0, 2.2-dev35 (more clickable things) |
| Usable in events: | click, inventory click |
| Return Type: | Object |
The clicked block, entity, inventory, inventory slot, inventory click type or inventory action.
Examples:
message "You clicked on a %type of clicked entity%!"
if the clicked block is a chest:
show the inventory of the clicked block to the player
if the clicked block is a chest:
show the inventory of the clicked block to the player
| Patterns: |
|
| Since: | 1.2, 2.10 (displays) |
| Return Type: | Color |
The color of an item, entity, block, firework effect, or text display.
This can also be used to color chat messages with "<%color of ...%>this text is colored!".
Do note that firework effects support setting, adding, removing, resetting, and deleting; text displays support setting and resetting; and items, entities, and blocks only support setting, and only for very few items/blocks.
This can also be used to color chat messages with "<%color of ...%>this text is colored!".
Do note that firework effects support setting, adding, removing, resetting, and deleting; text displays support setting and resetting; and items, entities, and blocks only support setting, and only for very few items/blocks.
Examples:
on click on wool:
if event-block is tagged with minecraft tag "wool":
message "This wool block is <%color of block%>%color of block%<reset>!"
set the color of the block to black
if event-block is tagged with minecraft tag "wool":
message "This wool block is <%color of block%>%color of block%<reset>!"
set the color of the block to black
| Patterns: | |
| Since: | 2.0 |
| Return Type: | Text |
Parses <color>s and, optionally, chat styles in a message or removes
any colors and chat styles from the message. Parsing all
chat styles requires this expression to be used in same line with
the send effect.
any colors and chat styles from the message. Parsing all
chat styles requires this expression to be used in same line with
the send effect.
Examples:
on chat:
set message to colored message # Safe; only colors get parsed
command /fade <player>:
trigger:
set display name of the player-argument to uncolored display name of the player-argument
command /format <text>:
trigger:
message formatted text-argument # Safe, because we're sending to whoever used this command
set message to colored message # Safe; only colors get parsed
command /fade <player>:
trigger:
set display name of the player-argument to uncolored display name of the player-argument
command /format <text>:
trigger:
message formatted text-argument # Safe, because we're sending to whoever used this command
| Patterns: |
|
| Since: | 2.0, 2.7 (support for script commands) |
| Usable in events: | command |
| Return Type: | Text |
The command that caused an 'on command' event (excluding the leading slash and all arguments)
Examples:
# prevent any commands except for the /exit command during some game
on command:
if {game::%player%::playing} is true:
if the command is not "exit":
message "You're not allowed to use commands during the game"
cancel the event
on command:
if {game::%player%::playing} is true:
if the command is not "exit":
message "You're not allowed to use commands during the game"
cancel the event
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Text |
Gets or sets the command associated with a command block or minecart with command block.
Examples:
send command of {_block}
set command of {_cmdMinecart} to "say asdf"
set command of {_cmdMinecart} to "say asdf"
| Patterns: |
|
| Since: | 2.6 |
| Return Type: | Text |
Get information about a command.
Examples:
main command label of command "skript"
description of command "help"
label of command "pl"
usage of command "help"
aliases of command "bukkit:help"
permission of command "/op"
command "op"'s permission message
command "sk"'s plugin owner
command /greet <player>:
usage: /greet <target>
trigger:
if arg-1 is sender:
send "&cYou can't greet yourself! Usage: %the usage%"
stop
send "%sender% greets you!" to arg-1
send "You greeted %arg-1%!"
description of command "help"
label of command "pl"
usage of command "help"
aliases of command "bukkit:help"
permission of command "/op"
command "op"'s permission message
command "sk"'s plugin owner
command /greet <player>:
usage: /greet <target>
trigger:
if arg-1 is sender:
send "&cYou can't greet yourself! Usage: %the usage%"
stop
send "%sender% greets you!" to arg-1
send "You greeted %arg-1%!"
| Patterns: |
|
| Since: | 2.0 |
| Usable in events: | command |
| Return Type: | Command Sender |
The player or the console who sent a command. Mostly useful in commands and command events.
If the command sender is a command block, its location can be retrieved by using %block's location%
If the command sender is a command block, its location can be retrieved by using %block's location%
Examples:
make the command sender execute "/say hi!"
on command:
log "%executor% used command /%command% %arguments%" to "commands.log"
on command:
log "%executor% used command /%command% %arguments%" to "commands.log"
| Patterns: | |
| Since: | 2.0 |
| Return Type: | Location |
The location a player's compass is pointing at.
As of Minecraft 1.21.4, the compass is controlled by the resource pack and by default will not point to this compass target when used outside of the overworld dimension.
As of Minecraft 1.21.4, the compass is controlled by the resource pack and by default will not point to this compass target when used outside of the overworld dimension.
Examples:
# make all player's compasses target a player stored in {compass::target::%player%}
every 5 seconds:
loop all players:
set the loop-player's compass target to location of {compass::target::%%loop-player%}
every 5 seconds:
loop all players:
set the loop-player's compass target to location of {compass::target::%%loop-player%}
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Config |
The Skript config.
This can be reloaded, or navigated to retrieve options.
This can be reloaded, or navigated to retrieve options.
Examples:
set {_node} to node "language" in the skript config if text value of {_node} is "french": broadcast "Bonjour!"
| Patterns: |
|
| Since: | 1.3.1 |
| Return Type: | Command Sender |
Represents the server's console which can receive messages and execute commands
Examples:
execute console command "/stop"
send "message to console" to the console
send "message to console" to the console
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Item |
Represents the item consumed within an entity shoot bow and item consume event.
Examples:
on player or skeleton shoot projectile: if the consumed item is an arrow: cancel event send "You're now allowed to shoot your arrows." to shooter
on player consume: if the consumed item is cooked porkchop: send "Well aren't you just a little piggy wiggly!" to player if player has scoreboard tag "vegetarian": set the consumed item to a carrot
on player consume: if the consumed item is cooked porkchop: send "Well aren't you just a little piggy wiggly!" to player if player has scoreboard tag "vegetarian": set the consumed item to a carrot
| Patterns: |
|
| Since: | 2.2-dev33 |
| Return Type: | Object |
Only usable in command events. Represents the cooldown time, the remaining time, the elapsed time,
the last usage date, or the cooldown bypass permission.
the last usage date, or the cooldown bypass permission.
Examples:
command /home:
cooldown: 10 seconds
cooldown message: You last teleported home %elapsed time% ago, you may teleport home again in %remaining time%.
trigger:
teleport player to {home::%player%}
cooldown: 10 seconds
cooldown message: You last teleported home %elapsed time% ago, you may teleport home again in %remaining time%.
trigger:
teleport player to {home::%player%}
| Patterns: | |
| Since: | 1.4.3 |
| Return Type: | Number |
Represents a given coordinate of a location.
Examples:
player's y-coordinate is smaller than 40:
message "Watch out for lava!"
message "Watch out for lava!"
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Loot Context |
Create a loot context.
Examples:
set {_player} to player
set {_context} to a loot context at player:
set loot luck value to 10
set looter to {_player}
set looted entity to last spawned pig
give player loot items of loot table "minecraft:entities/iron_golem" with loot context {_context}
set {_context} to a loot context at player:
set loot luck value to 10
set looter to {_player}
set looted entity to last spawned pig
give player loot items of loot table "minecraft:entities/iron_golem" with loot context {_context}
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | World Border |
Creates a new, unused world border. World borders can be assigned to either worlds or specific players.
Borders assigned to worlds apply to all players in that world.
Borders assigned to players apply only to those players, and different players can have different borders.
Borders assigned to worlds apply to all players in that world.
Borders assigned to players apply only to those players, and different players can have different borders.
Examples:
on join: set {_location} to location of player set worldborder of player to a virtual worldborder: set worldborder radius to 25 set world border center of event-worldborder to {_location}
on load: set worldborder of world "world" to a worldborder: set worldborder radius of event-worldborder to 200 set worldborder center of event-worldborder to location(0, 64, 0) set worldborder warning distance of event-worldborder to 5
on load: set worldborder of world "world" to a worldborder: set worldborder radius of event-worldborder to 200 set worldborder center of event-worldborder to location(0, 64, 0) set worldborder warning distance of event-worldborder to 5
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20.4+ |
| Return Type: | Damage Source |
Get the created damage source being created/modified in a 'custom damage source' section.
Examples:
set {_source} to a custom damage source: set the damage type of the created damage source to magic
| Patterns: |
|
| Since: | 1.0 |
| Return Type: | Entity |
The entity involved in an event (an entity is a player, a creature or an inanimate object like ignited TNT, a dropped item or an arrow).
You can use the specific type of the entity that's involved in the event, e.g. in a 'death of a creeper' event you can use 'the creeper' instead of 'the entity'.
You can use the specific type of the entity that's involved in the event, e.g. in a 'death of a creeper' event you can use 'the creeper' instead of 'the entity'.
Examples:
give a diamond sword of sharpness 3 to the player
kill the creeper
kill all powered creepers in the wolf's world
projectile is an arrow
kill the creeper
kill all powered creepers in the wolf's world
projectile is an arrow
| Patterns: | |
| Since: | 2.2-dev34, 2.8.0 (chat format) |
| Requirements: | Paper 1.16+ (chat format) |
| Return Type: | Inventory |
Returns a chest inventory with the given amount of rows and the name. Use the open inventory effect to open it.
Examples:
open chest inventory with 1 row named "test" to player
set {_inventory} to a chest inventory with 1 row
set slot 4 of {_inventory} to a diamond named "example"
open {_inventory} to player
open chest inventory named "<#00ff00>hex coloured title!" with 6 rows to player
set {_inventory} to a chest inventory with 1 row
set slot 4 of {_inventory} to a diamond named "example"
open {_inventory} to player
open chest inventory named "<#00ff00>hex coloured title!" with 6 rows to player
| Patterns: |
|
| Since: | 2.5 2.12 (floats/flags/strings/colours/full model data) |
| Requirements: | Minecraft 1.21.4+ (floats/flags/strings/colours/full model data) |
| Return Type: | Object |
Get/set the custom model data of an item. Using just `custom model data` will return an integer. Items without model data will return 0.
Since 1.21.4, custom model data instead consists of a list of numbers (floats), a list of booleans (flags), a list of strings, and a list of colours. Accessing and modifying these lists can be done type-by-type, or all at once with `complete custom model data`. This is the more accurate and recommended method of using custom model data.
Since 1.21.4, custom model data instead consists of a list of numbers (floats), a list of booleans (flags), a list of strings, and a list of colours. Accessing and modifying these lists can be done type-by-type, or all at once with `complete custom model data`. This is the more accurate and recommended method of using custom model data.
Examples:
set custom model data of player's tool to 3 set {_model} to custom model data of player's tool
set custom model data colours of {_flag} to red, white, and blue add 10.5 to the model data floats of {_flag}
set the full custom model data of {_item} to 10, "sword", and rgb(100, 200, 30)
set custom model data colours of {_flag} to red, white, and blue add 10.5 to the model data floats of {_flag}
set the full custom model data of {_item} to 10, "sword", and rgb(100, 200, 30)
| Patterns: |
|
| Since: | 1.3.5, 2.8.0 (item damage event) |
| Usable in events: | Damage, Vehicle Damage, Item Damage |
| Return Type: | Number |
How much damage is done in a entity/vehicle/item damage events.
For entity damage events, possibly ignoring armour, criticals and/or enchantments (remember that in Skript '1' is one full heart, not half a heart).
For items, it's the amount of durability damage the item will be taking.
For entity damage events, possibly ignoring armour, criticals and/or enchantments (remember that in Skript '1' is one full heart, not half a heart).
For items, it's the amount of durability damage the item will be taking.
Examples:
on item damage:
event-item is any tool
clear damage # unbreakable tools as the damage will be 0
on damage:
increase the damage by 2
event-item is any tool
clear damage # unbreakable tools as the damage will be 0
on damage:
increase the damage by 2
| Patterns: |
|
| Since: | 2.11 |
| Return Type: |
The amount of damage a player takes per second for each block they are outside the border plus the border buffer.
Players only take damage when outside of the world's world border, and the damage value cannot be less than 0.
Players only take damage when outside of the world's world border, and the damage value cannot be less than 0.
Examples:
set world border damage amount of {_worldborder} to 1
| Patterns: |
|
| Since: | 2.11 |
| Return Type: |
The amount of blocks a player may safely be outside the border before taking damage.
Players only take damage when outside of the world's world border, and the damage buffer distance cannot be less than 0.
Players only take damage when outside of the world's world border, and the damage buffer distance cannot be less than 0.
Examples:
set world border damage buffer of {_worldborder} to 10
| Patterns: |
|
| Since: | 2.0 |
| Return Type: | Damage Cause |
The damage cause of a damage event. Please click on the link for more information.
Examples:
damage cause is lava, fire or burning
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20.4+ |
| Return Type: | Damage Source |
Create a custom damage source and change the attributes.
When setting a 'causing entity' you must also set a 'direct entity'.
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
When setting a 'causing entity' you must also set a 'direct entity'.
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
Examples:
set {_source} to a custom damage source: set the damage type to magic set the causing entity to {_player} set the direct entity to {_arrow} set the damage location to location(0, 0, 10) damage all players by 5 using {_source}
on damage: if the damage type of event-damage source is magic: set the damage to damage * 2
on damage: if the damage type of event-damage source is magic: set the damage to damage * 2
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20.4+ |
| Return Type: | Entity |
The causing entity of a damage source.
The causing entity is the entity that ultimately caused the damage. (e.g. the entity that shot an arrow)
When setting a 'causing entity' you must also set a 'direct entity'.
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
The causing entity is the entity that ultimately caused the damage. (e.g. the entity that shot an arrow)
When setting a 'causing entity' you must also set a 'direct entity'.
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
Examples:
set {_source} to a custom damage source: set the damage type to magic set the causing entity to {_player} set the direct entity to {_arrow} set the damage location to location(0, 0, 10)
on damage: set {_causing} to the causing entity of event-damage source
on damage: set {_causing} to the causing entity of event-damage source
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20.4+ |
| Return Type: | Location |
The location where the damage was originated from.
The 'damage location' on vanilla damage sources will be set if an entity did not cause the damage.
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
The 'damage location' on vanilla damage sources will be set if an entity did not cause the damage.
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
Examples:
damage all players by 5 using a custom damage source: set the damage type to magic set the causing entity to {_player} set the direct entity to {_arrow} set the damage location to location(0, 0, 10)
on death: set {_location} to the damage location of event-damage source
on death: set {_location} to the damage location of event-damage source
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20.4+ |
| Return Type: | Damage Type |
The type of damage of a damage source.
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
Examples:
set {_source} to a custom damage source: set the damage type to magic set the causing entity to {_player} set the direct entity to {_arrow} set the damage location to location(0, 0, 10) damage all players by 5 using {_source}
on death: set {_type} to the damage type of event-damage source
on death: set {_type} to the damage type of event-damage source
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20.4+ |
| Return Type: | Entity |
The direct entity of a damage source.
The direct entity is the entity that directly caused the damage. (e.g. the arrow that was shot)
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
The direct entity is the entity that directly caused the damage. (e.g. the arrow that was shot)
Attributes of a damage source cannot be changed once created, only while within the 'custom damage source' section.
Examples:
set {_source} to a custom damage source: set the damage type to magic set the causing entity to {_player} set the direct entity to {_arrow} set the damage location to location(0, 0, 10) damage all players by 5 using {_source}
on death: set {_direct} to the direct entity of event-damage source
on death: set {_direct} to the direct entity of event-damage source
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20.4+ |
| Return Type: |
The amount of hunger exhaustion caused by a damage source.
Examples:
on damage: if the food exhaustion of event-damage source is 10:
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20.4+ |
| Return Type: | Location |
The final location where the damage was originated from.
The 'source location' for vanilla damage sources will retrieve the 'damage location' if set. If 'damage location' is not set, will attempt to grab the location of the 'causing entity', otherwise, null.
The 'source location' for vanilla damage sources will retrieve the 'damage location' if set. If 'damage location' is not set, will attempt to grab the location of the 'causing entity', otherwise, null.
Examples:
on death: set {_location} to the source location of event-damage source
| Patterns: |
|
| Since: | 1.2, 2.7 (durability reversed) |
| Return Type: |
The damage value/durability of an item.
Examples:
set damage value of player's tool to 10
reset the durability of {_item}
set durability of player's held item to 0
reset the durability of {_item}
set durability of player's held item to 0
| Patterns: | |
| Since: | 2.4 |
| Return Type: | Item Type |
Directly damages an item. In MC versions 1.12.2 and lower, this can be used to apply data values to items/blocks
Examples:
give player diamond sword with damage value 100
set player's tool to diamond hoe damaged by 250
give player diamond sword with damage 700 named "BROKEN SWORD"
set {_item} to diamond hoe with damage value 50 named "SAD HOE"
set player's tool to diamond hoe damaged by 250
give player diamond sword with damage 700 named "BROKEN SWORD"
set {_item} to diamond hoe with damage value 50 named "SAD HOE"
| Patterns: | |
| Since: | 2.2-dev33 |
| Return Type: | Date |
A date the specified timespan before/after another date.
Examples:
set {_yesterday} to 1 day ago
set {_hourAfter} to 1 hour after {someOtherDate}
set {_hoursBefore} to 5 hours before {someOtherDate}
set {_hourAfter} to 1 hour after {someOtherDate}
set {_hoursBefore} to 5 hours before {someOtherDate}
| Patterns: | |
| Since: | 2.10 (experimental) |
| Return Type: | Object |
Requires the
using queues experimental feature flag to be enabled.Unrolls a queue into a regular list of values, which can be stored in a list variable. The order of the list will be the same as the order of the elements in the queue. If a list variable is set to this, it will use numerical indices. The original queue will not be changed.
Examples:
set {queue} to a new queue add "hello" and "there" to {queue} set {list::*} to dequeued {queue}
| Patterns: | |
| Since: | 1.4 |
| Return Type: | Object |
Examples:
if difference between {command::%player%::lastuse} and now is smaller than a minute:
message "You have to wait a minute before using this command again!"
message "You have to wait a minute before using this command again!"
| Patterns: | |
| Since: | 2.3 |
| Return Type: | Difficulty |
The difficulty of a world.
Examples:
set the difficulty of "world" to hard
| Patterns: |
|
| Since: | 1.0 (basic), 2.0 (extended) |
| Return Type: | Direction |
A helper expression for the direction type.
Examples:
thrust the player upwards
set the block behind the player to water
loop blocks above the player:
set {_rand} to a random integer between 1 and 10
set the block {_rand} meters south east of the loop-block to stone
block in horizontal facing of the clicked entity from the player is air
spawn a creeper 1.5 meters horizontally behind the player
spawn a TNT 5 meters above and 2 meters horizontally behind the player
thrust the last spawned TNT in the horizontal direction of the player with speed 0.2
push the player upwards and horizontally forward at speed 0.5
push the clicked entity in in the direction of the player at speed -0.5
open the inventory of the block 2 blocks below the player to the player
teleport the clicked entity behind the player
grow a regular tree 2 meters horizontally behind the player
set the block behind the player to water
loop blocks above the player:
set {_rand} to a random integer between 1 and 10
set the block {_rand} meters south east of the loop-block to stone
block in horizontal facing of the clicked entity from the player is air
spawn a creeper 1.5 meters horizontally behind the player
spawn a TNT 5 meters above and 2 meters horizontally behind the player
thrust the last spawned TNT in the horizontal direction of the player with speed 0.2
push the player upwards and horizontally forward at speed 0.5
push the clicked entity in in the direction of the player at speed -0.5
open the inventory of the block 2 blocks below the player to the player
teleport the clicked entity behind the player
grow a regular tree 2 meters horizontally behind the player
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Display Billboard |
Returns or changes the billboard setting of displays.
This describes the axes/points around which the display can pivot.
Displays spawn with the 'fixed' billboard by default. Resetting this expression will also set it to 'fixed'.
This describes the axes/points around which the display can pivot.
Displays spawn with the 'fixed' billboard by default. Resetting this expression will also set it to 'fixed'.
Examples:
set billboard of the last spawned text display to center
| Patterns: | |
| Since: | 2.10 |
| Return Type: |
Returns or changes the brightness override of displays.
Unmodified displays will not have a brightness override value set. Resetting or deleting this value will remove the override.
Use the 'block' or 'sky' options to get/change specific values or get both values as a list by using neither option.
NOTE: setting only one of the sky/block light overrides of a display without an existing override will set both sky and block light to the given value. Make sure to set both block and sky levels to your desired values for the best results. Likewise, you can only clear the brightness override, you cannot clear/reset the sky/block values individually.
Unmodified displays will not have a brightness override value set. Resetting or deleting this value will remove the override.
Use the 'block' or 'sky' options to get/change specific values or get both values as a list by using neither option.
NOTE: setting only one of the sky/block light overrides of a display without an existing override will set both sky and block light to the given value. Make sure to set both block and sky levels to your desired values for the best results. Likewise, you can only clear the brightness override, you cannot clear/reset the sky/block values individually.
Examples:
set sky light override of the last spawned text display to 7
subtract 3 from the block light level override of the last spawned text display
if sky light level override of {_display} is 5:
clear brightness override of {_display}
subtract 3 from the block light level override of the last spawned text display
if sky light level override of {_display} is 5:
clear brightness override of {_display}
| Patterns: | |
| Since: | 2.10 |
| Return Type: |
Returns or changes the height or width of displays.
The rendering culling bounding box spans horizontally width/2 from entity position, which determines the point at which the display will be frustum culled (no longer rendered because the game determines you are no longer able to see it).
If set to 0, no culling will occur on both the vertical and horizontal directions. Default is 0.0.
The rendering culling bounding box spans horizontally width/2 from entity position, which determines the point at which the display will be frustum culled (no longer rendered because the game determines you are no longer able to see it).
If set to 0, no culling will occur on both the vertical and horizontal directions. Default is 0.0.
Examples:
set display height of the last spawned text display to 2.5
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Timespan |
Returns or changes the interpolation delay/duration of displays.
Interpolation duration is the amount of time a display will take to interpolate, or shift, between its current state and a new state.
Interpolation delay is the amount of ticks before client-side interpolation will commence.Setting to 0 seconds will make it immediate.
Resetting either value will return that value to 0.
Interpolation duration is the amount of time a display will take to interpolate, or shift, between its current state and a new state.
Interpolation delay is the amount of ticks before client-side interpolation will commence.Setting to 0 seconds will make it immediate.
Resetting either value will return that value to 0.
Examples:
set interpolation delay of the last spawned text display to 2 ticks
| Patterns: | |
| Since: | 2.10 |
| Requirements: | Spigot 1.20.4+ |
| Return Type: | Timespan |
The teleport duration of displays is the amount of time it takes to get between locations.
0 means that updates are applied immediately.
1 means that the display entity will move from current position to the updated one over one tick.
Higher values spread the movement over multiple ticks. Max of 59 ticks.
0 means that updates are applied immediately.
1 means that the display entity will move from current position to the updated one over one tick.
Higher values spread the movement over multiple ticks. Max of 59 ticks.
Examples:
set teleport duration of the last spawned text display to 2 ticks
teleport last spawned text display to {_location}
wait 2 ticks
message "display entity has arrived at %{_location}%"
teleport last spawned text display to {_location}
wait 2 ticks
message "display entity has arrived at %{_location}%"
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Quaternion |
Returns or changes the transformation rotation of displays.
The left rotation is applied first, with the right rotation then being applied based on the rotated axis.
The left rotation is applied first, with the right rotation then being applied based on the rotated axis.
Examples:
set left transformation rotation of last spawned block display to quaternion(1, 0, 0, 0) # reset block display
| Patterns: | |
| Since: | 2.10 |
| Return Type: |
Returns or changes the view range of displays.
Default value is 1.0. This value is then multiplied by 64 and the player's entity view distance setting to determine the actual range.
For example, a player with 150% entity view distance will see a block display with a view range of 1.2 at 1.2 * 64 * 150% = 115.2 blocks away.
Default value is 1.0. This value is then multiplied by 64 and the player's entity view distance setting to determine the actual range.
For example, a player with 150% entity view distance will see a block display with a view range of 1.2 at 1.2 * 64 * 150% = 115.2 blocks away.
Examples:
set view range of the last spawned text display to 2.9
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | UUID |
The uuid of the owner of the dropped item. Setting the owner of a dropped item means only that entity or player can pick it up. Dropping an item does not automatically make the entity or player the owner.
Examples:
set the uuid of the dropped item owner of last dropped item to player if the uuid of the dropped item owner of last dropped item is uuid of player:
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | UUID |
The uuid of the entity or player that threw/dropped the dropped item.
Examples:
set the uuid of the dropped item thrower of {_dropped item} to player if the uuid of the dropped item thrower of {_dropped item} is uuid of player:
clear the item thrower of {_dropped item}
clear the item thrower of {_dropped item}
| Patterns: |
|
| Since: | 1.0 |
| Usable in events: | death |
| Return Type: | Item Type |
This expression only works in death and harvest events.
In a death event, will hold the drops of the dying creature.
Drops can be prevented by removing them with "remove ... from drops", e.g. "remove all pickaxes from the drops", or "clear drops" if you don't want any drops at all.
In a death event, will hold the drops of the dying creature.
Drops can be prevented by removing them with "remove ... from drops", e.g. "remove all pickaxes from the drops", or "clear drops" if you don't want any drops at all.
Examples:
clear drops
remove 4 planks from the drops
remove 4 planks from the drops
| Patterns: | |
| Since: | 2.5.1 |
| Requirements: | Minecraft 1.15+ ('as %entity%') |
| Return Type: | Item Type |
A list of the items that will drop when a block is broken.
Examples:
on break of block:
give drops of block using player's tool to player
give drops of block using player's tool to player
| Patterns: |
|
| Since: | 2.12 |
| Requirements: | Minecraft 1.20+ |
| Return Type: |
Represents how far the block has been uncovered.
The only blocks that can currently be "dusted" are Suspicious Gravel and Suspicious Sand.
The only blocks that can currently be "dusted" are Suspicious Gravel and Suspicious Sand.
Examples:
send target block's maximum dusted stage
set {_sand}'s dusted stage to 2
set {_sand}'s dusted stage to 2
| Patterns: |
|
| Since: | 2.0, 2.7 (relative to last element), 2.8.0 (range of elements) |
| Return Type: | Object |
The first, last, range or a random element of a set, e.g. a list variable, or a queue.
Asking for elements from a queue will also remove them from the queue, see the new queue expression for more information.
See also: random expression
Asking for elements from a queue will also remove them from the queue, see the new queue expression for more information.
See also: random expression
Examples:
broadcast the first 3 elements of {top players::*}
set {_last} to last element of {top players::*}
set {_random player} to random element out of all players
send 2nd last element of {top players::*} to player
set {page2::*} to elements from 11 to 20 of {top players::*}
broadcast the 1st element in {queue}
broadcast the first 3 elements in {queue}
set {_last} to last element of {top players::*}
set {_random player} to random element out of all players
send 2nd last element of {top players::*} to player
set {page2::*} to elements from 11 to 20 of {top players::*}
broadcast the 1st element in {queue}
broadcast the first 3 elements in {queue}
| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | enchant prepare, enchant |
| Return Type: | Item Type |
The enchant item in an enchant prepare event or enchant event.
It can be modified, but enchantments will still be applied in the enchant event.
It can be modified, but enchantments will still be applied in the enchant event.
Examples:
on enchant:
set the enchanted item to a diamond chestplate
on enchant prepare:
set the enchant item to a wooden sword
set the enchanted item to a diamond chestplate
on enchant prepare:
set the enchant item to a wooden sword
| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | enchant |
| Return Type: |
The cost of enchanting in an enchant event.
This is number that was displayed in the enchantment table, not the actual number of levels removed.
This is number that was displayed in the enchantment table, not the actual number of levels removed.
Examples:
on enchant:
send "Cost: %the displayed enchanting cost%" to player
send "Cost: %the displayed enchanting cost%" to player
| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | enchant prepare |
| Return Type: |
The enchantment bonus in an enchant prepare event. This represents the number of bookshelves affecting/surrounding the enchantment table.
Examples:
on enchant:
send "There are %enchantment bonus% bookshelves surrounding this enchantment table!" to player
send "There are %enchantment bonus% bookshelves surrounding this enchantment table!" to player
| Patterns: |
|
| Since: | 2.0 |
| Return Type: |
The level of a particular enchantment on an item.
Examples:
player's tool is a sword of sharpness:
message "You have a sword of sharpness %level of sharpness of the player's tool% equipped"
message "You have a sword of sharpness %level of sharpness of the player's tool% equipped"
| Patterns: | |
| Since: | 2.5 |
| Usable in events: | enchant prepare |
| Requirements: | 1.11 or newer |
| Return Type: | Enchantment Offer |
The enchantment offer in enchant prepare events.
Examples:
on enchant prepare:
send "Your enchantment offers are: %the enchantment offers%" to player
send "Your enchantment offers are: %the enchantment offers%" to player
| Patterns: |
|
| Since: | 2.5 |
| Requirements: | 1.11 or newer |
| Return Type: |
The cost of an enchantment offer. This is displayed to the right of an enchantment offer.
If the cost is changed, it will always be at least 1.
This changes how many levels are required to enchant, but does not change the number of levels removed.
To change the number of levels removed, use the enchant event.
If the cost is changed, it will always be at least 1.
This changes how many levels are required to enchant, but does not change the number of levels removed.
To change the number of levels removed, use the enchant event.
Examples:
set cost of enchantment offer 1 to 50
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Block Data |
The block data an enderman is carrying.
Custom attributes such as NBT or names do not transfer over.
Blocks, blockdatas and items are acceptable objects to change the carrying block.
Custom attributes such as NBT or names do not transfer over.
Blocks, blockdatas and items are acceptable objects to change the carrying block.
Examples:
broadcast the carrying blockdata of last spawned enderman
set the carried block of last spawned enderman to an oak log
set the carrying block data of {_enderman} to oak stairs[facing=north]
set the carried blockdata of {_enderman} to {_item}
clear the carried blockdata of {_enderman}
set the carried block of last spawned enderman to an oak log
set the carrying block data of {_enderman} to oak stairs[facing=north]
set the carried blockdata of {_enderman} to {_item}
clear the carried blockdata of {_enderman}
| Patterns: |
|
| Since: | 1.2.1, 2.5 (chunks), 2.10 (within) |
| Return Type: | Entity |
All entities in all worlds, in a specific world, in a chunk, in a radius around a certain location or within two locations. e.g.
all players, all creepers in the player's world, or players in radius 100 of the player. Examples:
kill all creepers in the player's world
send "Psst!" to all players within 100 meters of the player
give a diamond to all ops
heal all tamed wolves in radius 2000 around {town center}
delete all monsters in chunk at player
size of all players within {_corner::1} and {_corner::2}}
send "Psst!" to all players within 100 meters of the player
give a diamond to all ops
heal all tamed wolves in radius 2000 around {town center}
delete all monsters in chunk at player
size of all players within {_corner::1} and {_corner::2}}
| Patterns: |
|
| Since: | 2.5 |
| Return Type: | Boolean |
Returns whether an entity has AI.
Examples:
set artificial intelligence of target entity to false
| Patterns: |
|
| Since: | 2.5, 2.6.1 (final attribute value) |
| Return Type: | Number |
The numerical value of an entity's particular attribute.
Note that the movement speed attribute cannot be reliably used for players. For that purpose, use the speed expression instead.
Resetting an entity's attribute is only available in Minecraft 1.11 and above.
Note that the movement speed attribute cannot be reliably used for players. For that purpose, use the speed expression instead.
Resetting an entity's attribute is only available in Minecraft 1.11 and above.
Examples:
on damage of player:
send "You are wounded!" to victim
set victim's attack speed attribute to 2
send "You are wounded!" to victim
set victim's attack speed attribute to 2
| Patterns: | |
| Since: | 2.7, 2.10 (maximum) |
| Return Type: | Timespan |
How much time an entity will be burning for.
Examples:
send "You will stop burning in %fire time of player%"
send the max burn time of target
send the max burn time of target
| Patterns: |
|
| Since: | 2.5 |
| Return Type: | Offline Player |
The owner of a tameable entity (i.e. horse or wolf).
Examples:
set owner of last spawned wolf to player if the owner of last spawned wolf is player:
| Patterns: |
|
| Since: | 2.11 |
| Return Type: |
Changes the entity size of slimes and phantoms. This is not the same as changing the scale attribute of an entity.
When changing the size of a slime, its health is fully resorted and will have changes done to its max health, movement speed and attack damage.
The default minecraft size of a slime is anywhere between 0 and 2, with a maximum of 126.
The default minecraft size of a phantom is 0 with a maximum size of 64.
When changing the size of a slime, its health is fully resorted and will have changes done to its max health, movement speed and attack damage.
The default minecraft size of a slime is anywhere between 0 and 2, with a maximum of 126.
The default minecraft size of a phantom is 0 with a maximum size of 64.
Examples:
spawn a slime at player: set entity size of event-entity to 5 set name of event-entity to "King Slime Jorg"
| Patterns: |
|
| Since: | 2.10 |
| Requirements: | Minecraft 1.20.2+ |
| Return Type: | Entity Snapshot |
Returns the entity snapshot of a provided entity, which includes all the data associated with it (name, health, attributes, etc.) at the time this expression is used.
Individual attributes of a snapshot cannot be modified or retrieved.
Individual attributes of a snapshot cannot be modified or retrieved.
Examples:
spawn a pig at location(0, 0, 0):
set the max health of entity to 20
set the health of entity to 20
set {_snapshot} to the entity snapshot of entity
clear entity
spawn {_snapshot} at location(0, 0, 0)
set the max health of entity to 20
set the health of entity to 20
set {_snapshot} to the entity snapshot of entity
clear entity
spawn {_snapshot} at location(0, 0, 0)
| Patterns: |
|
| Since: | 2.10 |
| Requirements: | Spigot 1.19.2+ |
| Return Type: | Text |
Gets the sound that a given entity will make in a specific scenario.
Examples:
play sound (hurt sound of player) at player
set {_sounds::*} to death sounds of (all mobs in radius 10 of player)
set {_sounds::*} to death sounds of (all mobs in radius 10 of player)
| Patterns: | |
| Since: | 2.11 |
| Return Type: |
The current number of entities stored inside an entity block storage (i.e. beehive).
The maximum amount of entities an entity block storage can hold.
The maximum amount of entities an entity block storage can hold.
Examples:
broadcast the stored entity count of {_beehive}
set the maximum entity count of {_beehive} to 20
set the maximum entity count of {_beehive} to 20
| Patterns: | |
| Since: | 2.11 |
| Return Type: | Object |
Get an entity, player, offline player or world from a UUID.
Unloaded entities or players that are offline (when using 'player from %uuid%') will return nothing.
Unloaded entities or players that are offline (when using 'player from %uuid%') will return nothing.
Examples:
set {_player} to player from "a0789aeb-7b46-43f6-86fb-cb671fed5775" parsed as uuid
set {_offline player} to offline player from {_some uuid}
set {_entity} to entity from {_some uuid}
set {_world} to world from {_some uuid}
set {_offline player} to offline player from {_some uuid}
set {_entity} to entity from {_some uuid}
set {_world} to world from {_some uuid}
| Patterns: | |
| Since: | 2.12 |
| Return Type: | Item |
Get an exact item representation of a block, carrying over any data. For example, using this expression on a chest block with items stored inside will return a chest item with the exact same items in its inventory as the chest block.
Examples:
set {_item} to exact item of block at location(0, 0, 0)
| Patterns: | |
| Since: | 2.12 |
| Return Type: | Object |
Filter a list by providing objects to be excluded.
Examples:
spawn zombie at location(0, 0, 0): hide entity from all players except {_player}
set {_items::*} to a copper ingot, an iron ingot and a gold ingot set {_except::*} to {_items::*} excluding copper ingot
set {_items::*} to a copper ingot, an iron ingot and a gold ingot set {_except::*} to {_items::*} excluding copper ingot
| Patterns: |
|
| Since: | 2.1, 2.5.3 (block break event), 2.7 (experience change event), 2.10 (breeding, fishing) |
| Usable in events: | experience spawn, break / mine, experience change, entity breeding |
| Return Type: | Experience |
How much experience was spawned in an experience spawn or block break event. Can be changed.
Examples:
on experience spawn:
add 5 to the spawned experience
on break of coal ore:
clear dropped experience
on break of diamond ore:
if tool of player = diamond pickaxe:
add 100 to dropped experience
on breed:
breeding father is a cow
set dropped experience to 10
on fish catch:
add 70 to dropped experience
add 5 to the spawned experience
on break of coal ore:
clear dropped experience
on break of diamond ore:
if tool of player = diamond pickaxe:
add 100 to dropped experience
on breed:
breeding father is a cow
set dropped experience to 10
on fish catch:
add 70 to dropped experience
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Experience Cooldown Change Reason |
The experience change reason within an experience cooldown change event.
Examples:
on player experience cooldown change:
if xp cooldown change reason is plugin:
#Changed by a plugin
else if xp cooldown change reason is orb pickup:
#Changed by picking up xp orb
if xp cooldown change reason is plugin:
#Changed by a plugin
else if xp cooldown change reason is orb pickup:
#Changed by picking up xp orb
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Timespan |
The experience cooldown of a player.
Experience cooldown is how long until a player can pick up another orb of experience.
The cooldown of a player must be 0 to pick up another orb of experience.
Experience cooldown is how long until a player can pick up another orb of experience.
The cooldown of a player must be 0 to pick up another orb of experience.
Examples:
send experience cooldown of player
set the xp pickup cooldown of player to 1 hour
if exp collection cooldown of player >= 10 minutes:
clear the experience pickup cooldown of player
set the xp pickup cooldown of player to 1 hour
if exp collection cooldown of player >= 10 minutes:
clear the experience pickup cooldown of player
| Patterns: |
|
| Since: | 2.5, 2.8.6 (modify blocks) |
| Usable in events: | explode |
| Return Type: | Block |
Get all the blocks that were destroyed in an explode event. Supports add/remove/set/clear/delete blocks.
Examples:
on explode:
loop exploded blocks:
add loop-block to {exploded::blocks::*}
on explode:
loop exploded blocks:
if loop-block is grass:
remove loop-block from exploded blocks
on explode:
clear exploded blocks
on explode:
set exploded blocks to blocks in radius 10 around event-entity
on explode:
add blocks above event-entity to exploded blocks
loop exploded blocks:
add loop-block to {exploded::blocks::*}
on explode:
loop exploded blocks:
if loop-block is grass:
remove loop-block from exploded blocks
on explode:
clear exploded blocks
on explode:
set exploded blocks to blocks in radius 10 around event-entity
on explode:
add blocks above event-entity to exploded blocks
| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | explosion |
| Return Type: | Number |
The percentage of exploded blocks dropped in an explosion event.
When changing the yield, a value greater than 1 will function the same as using 1.
Attempting to change the yield to a value less than 0 will have no effect.
When changing the yield, a value greater than 1 will function the same as using 1.
Attempting to change the yield to a value less than 0 will have no effect.
Examples:
on explode:
set the explosion's block yield to 10%
set the explosion's block yield to 10%
| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | explosion prime |
| Return Type: | Number |
The yield of the explosion in an explosion prime event. This is how big the explosion is.
When changing the yield, values less than 0 will be ignored.
Read this wiki page for more information
When changing the yield, values less than 0 will be ignored.
Read this wiki page for more information
Examples:
on explosion prime:
set the yield of the explosion to 10
set the yield of the explosion to 10
| Patterns: | |
| Since: | 2.5, 2.11 (ghasts) |
| Requirements: | Paper (ghasts) |
| Return Type: | Number |
The yield of an explosive (creeper, ghast, primed tnt, fireball, etc.). This is how big of an explosion is caused by the entity.
Read this wiki page for more information.
The yield of ghasts can only be set to between 0 and 127.
Read this wiki page for more information.
The yield of ghasts can only be set to between 0 and 127.
Examples:
on spawn of a creeper:
set the explosive yield of the event-entity to 10
set the explosive yield of the event-entity to 10
| Patterns: |
|
| Since: | 1.4 |
| Return Type: | Direction |
The facing of an entity or block, i.e. exactly north, south, east, west, up or down (unlike direction which is the exact direction, e.g. '0.5 south and 0.7 east')
Examples:
# makes a bridge
loop blocks from the block below the player in the horizontal facing of the player:
set loop-block to cobblestone
loop blocks from the block below the player in the horizontal facing of the player:
set loop-block to cobblestone
| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | block fertilize |
| Requirements: | Minecraft 1.13 or newer |
| Return Type: | Block |
The blocks fertilized in block fertilize events.
Examples:
the fertilized blocks
| Patterns: | |
| Since: | 2.2-dev36, 2.10 (parenthesis pattern) |
| Return Type: | Object |
Filters a list based on a condition.
For example, if you ran 'broadcast "something" and "something else" where [string input is "something"]',
only "something" would be broadcast as it is the only string that matched the condition.
For example, if you ran 'broadcast "something" and "something else" where [string input is "something"]',
only "something" would be broadcast as it is the only string that matched the condition.
Examples:
send "congrats on being staff!" to all players where [player input has permission "staff"]
loop (all blocks in radius 5 of player) where [block input is not air]:
loop (all blocks in radius 5 of player) where [block input is not air]:
| Patterns: |
|
| Since: | 2.4 |
| Return Type: | Firework Effect |
Represents a 'firework effect' which can be used in the launch firework effect.
Examples:
launch flickering trailing burst firework colored blue and green at player
launch trailing flickering star colored purple, yellow, blue, green and red fading to pink at target entity
launch ball large colored red, purple and white fading to light green and black at player's location with duration 1
launch trailing flickering star colored purple, yellow, blue, green and red fading to pink at target entity
launch ball large colored red, purple and white fading to light green and black at player's location with duration 1
| Patterns: |
|
| Since: | 2.12 |
| Return Type: | Slot |
Returns the first empty slot in an inventory. If no empty slot is found, it returns nothing.
Examples:
set the first empty slot in player's inventory to 5 diamonds
if the first empty slot in player's inventory is not set: message "No empty slot available in your inventory!" to player
if the first empty slot in player's inventory is not set: message "No empty slot available in your inventory!" to player
| Patterns: |
|
| Since: | 2.10 |
| Usable in events: | Fishing |
| Return Type: |
Returns the angle at which the fish will approach the fishing hook, after the wait time.
The angle is in degrees, with 0 being positive Z, 90 being negative X, 180 being negative Z, and 270 being positive X.
By default, returns a value between 0 and 360 degrees.
The angle is in degrees, with 0 being positive Z, 90 being negative X, 180 being negative Z, and 270 being positive X.
By default, returns a value between 0 and 360 degrees.
Examples:
on fish approach:
if any:
maximum fishing approach angle is bigger than 300.5 degrees
min fishing approach angle is smaller than 59.5 degrees
then:
cancel event
if any:
maximum fishing approach angle is bigger than 300.5 degrees
min fishing approach angle is smaller than 59.5 degrees
then:
cancel event
| Patterns: |
|
| Since: | 2.10 |
| Usable in events: | Fishing |
| Requirements: | Paper 1.20.6 |
| Return Type: | Timespan |
Returns the time it takes a fish to bite the fishing hook, after it started approaching the hook.
May return a timespan of 0 seconds. If modifying the value, it should be at least 1 tick.
May return a timespan of 0 seconds. If modifying the value, it should be at least 1 tick.
Examples:
on fish approach:
set fishing bite time to 5 seconds
set fishing bite time to 5 seconds
| Patterns: |
|
| Since: | 2.10 |
| Usable in events: | Fishing |
| Return Type: | Entity |
The fishing hook in a fishing event.
Examples:
on fish line cast:
wait a second
teleport player to fishing hook
wait a second
teleport player to fishing hook
| Patterns: |
|
| Since: | 2.10 |
| Usable in events: | Fishing |
| Return Type: | Timespan |
Returns the minimum and/or maximum waiting time of the fishing hook.
Default minimum value is 5 seconds and maximum is 30 seconds, before lure is applied.
Default minimum value is 5 seconds and maximum is 30 seconds, before lure is applied.
Examples:
on fishing line cast:
set min fish waiting time to 10 seconds
set max fishing waiting time to 20 seconds
set min fish waiting time to 10 seconds
set max fishing waiting time to 20 seconds
| Patterns: | |
| Since: | 2.2-dev31, 2.7 (support variables in format) |
| Return Type: | Text |
Converts date to human-readable text format. By default, 'yyyy-MM-dd HH:mm:ss z' (e.g. '2018-03-30 16:03:12 +01') will be used. For reference, see this Wikipedia article.
Examples:
command /date:
trigger:
send "Full date: %now formatted human-readable%" to sender
send "Short date: %now formatted as "yyyy-MM-dd"%" to sender
trigger:
send "Full date: %now formatted human-readable%" to sender
send "Short date: %now formatted as "yyyy-MM-dd"%" to sender
| Patterns: | |
| Since: | 1.1 |
| Return Type: | Object |
Represents the value of an expression before an event happened or the value it will have directly after the event, e.g. the old or new level respectively in a level change event.
Note: The past, future and present states of an expression are sometimes called 'time states' of an expression.
Note 2: If you don't specify whether to use the past or future state of an expression that has different values, its default value will be used which is usually the value after the event.
Note: The past, future and present states of an expression are sometimes called 'time states' of an expression.
Note 2: If you don't specify whether to use the past or future state of an expression that has different values, its default value will be used which is usually the value after the event.
Examples:
on teleport:
former world was "world_nether" # or 'world was'
world will be "world" # or 'world after the event is'
on tool change:
past tool is an axe
the tool after the event will be air
on weather change:
set {weather::%world%::old} to past weather
set {weather::%world%::current} to the new weather
former world was "world_nether" # or 'world was'
world will be "world" # or 'world after the event is'
on tool change:
past tool is an axe
the tool after the event will be air
on weather change:
set {weather::%world%::old} to past weather
set {weather::%world%::current} to the new weather
| Patterns: |
|
| Since: | 2.8.0 |
| Return Type: |
The free, max or total memory of the server in Megabytes.
Examples:
while player is online:
send action bar "Memory left: %free memory%/%max memory%MB" to player
wait 5 ticks
send action bar "Memory left: %free memory%/%max memory%MB" to player
wait 5 ticks
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Function |
Obtain a function by name, which can be executed.
Examples:
set {_function} to the function named "myFunction"
run {_function} with arguments 13 and true
run {_function} with arguments 13 and true
| Patterns: |
|
| Since: | 2.10 |
| Usable in events: | smelt, fuel burn, smelting start, furnace extract |
| Return Type: | Item |
Represents the different items in furnace events.
Only 'smelting item' can be changed.
Only 'smelting item' can be changed.
Examples:
on furnace smelt:
broadcast smelted item
# Or 'result'
on furnace extract:
broadcast extracted item
on fuel burn:
broadcast burned fuel
on smelting start:
broadcast smelting item
clear smelting item
broadcast smelted item
# Or 'result'
on furnace extract:
broadcast extracted item
on fuel burn:
broadcast burned fuel
on smelting start:
broadcast smelting item
clear smelting item
| Patterns: | |
| Since: | 1.0, 2.8.0 (syntax rework) |
| Usable in events: | smelt, fuel burn |
| Return Type: | Slot |
A slot of a furnace, i.e. either the ore, fuel or result slot.
Examples:
set the fuel slot of the clicked block to a lava bucket
set the block's ore slot to 64 iron ore
clear the result slot of the block
on smelt:
if the fuel slot is charcoal:
add 5 seconds to the burn time
set the block's ore slot to 64 iron ore
clear the result slot of the block
on smelt:
if the fuel slot is charcoal:
add 5 seconds to the burn time
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Timespan |
The cook time, total cook time, and burn time of a furnace. Can be changed.
- cook time: The amount of time an item has been smelting for.
- total cook time: The amount of time required to finish smelting an item.
- burn time: The amount of time left for the current fuel until consumption of another fuel item.
Examples:
set the cooking time of {_block} to 10
set the total cooking time of {_block} to 50
set the fuel burning time of {_block} to 100
on smelt:
if the fuel slot is charcoal:
add 5 seconds to the fuel burn time
set the total cooking time of {_block} to 50
set the fuel burning time of {_block} to 100
on smelt:
if the fuel slot is charcoal:
add 5 seconds to the fuel burn time
| Patterns: | |
| Since: | 2.5 |
| Requirements: | Minecraft 1.13+ |
| Return Type: | Gamerule Value |
The gamerule value of a world.
Examples:
set the gamerule commandBlockOutput of world "world" to false
| Patterns: |
|
| Since: | 2.2-dev21 |
| Return Type: | Boolean |
Sets of gets gliding state of player. It allows you to set gliding state of entity even if they do not have an Elytra equipped.
Examples:
set gliding of player to off
| Patterns: |
|
| Since: | 2.2-dev35 |
| Requirements: | Vault, a permission plugin that supports Vault |
| Return Type: | Text |
The primary group or all groups of a player. This expression requires Vault and a compatible permissions plugin to be installed.
If you have LuckPerms, ensure you have vault integration enabled in the luck perms configurations.
If you have LuckPerms, ensure you have vault integration enabled in the luck perms configurations.
Examples:
on join:
broadcast "%group of player%" # this is the player's primary group
broadcast "%groups of player%" # this is all of the player's groups
broadcast "%group of player%" # this is the player's primary group
broadcast "%groups of player%" # this is all of the player's groups
| Patterns: |
|
| Since: | 2.6.2 |
| Return Type: | Entity |
Examples:
on break of item frame:
if item of hanging entity is diamond pickaxe:
cancel event
if hanging remover is a player:
send "You can't break that item frame!" to hanging remover
if item of hanging entity is diamond pickaxe:
cancel event
if hanging remover is a player:
send "You can't break that item frame!" to hanging remover
| Patterns: |
|
| Since: | 2.0, 2.2-dev32 (SHA-256 algorithm), 2.12 (SHA-384, SHA-512) |
| Return Type: | Text |
Hashes the given text using the MD5 or SHA algorithms. Each algorithm is suitable for different use cases.
These hashing algorithms are not suitable for hashing passwords.
If handling passwords, use a hashing algorithm specifically designed for passwords.
MD5 is deprecated and may be removed in a future release. It is provided mostly for backwards compatibility, as it is outdated and not secure.
SHA is more secure, but is not suitable for hashing passwords (even with salting).
When hashing data, you must specify algorithms that will be used for security reasons!
Please note that a hash cannot be reversed under normal circumstances. You will not be able to get original value from a hash with Skript.
These hashing algorithms are not suitable for hashing passwords.
If handling passwords, use a hashing algorithm specifically designed for passwords.
MD5 is deprecated and may be removed in a future release. It is provided mostly for backwards compatibility, as it is outdated and not secure.
SHA is more secure, but is not suitable for hashing passwords (even with salting).
When hashing data, you must specify algorithms that will be used for security reasons!
Please note that a hash cannot be reversed under normal circumstances. You will not be able to get original value from a hash with Skript.
Examples:
set {_hash} to "hello world" hashed with SHA-256
| Patterns: |
|
| Since: | 2.7 |
| Usable in events: | Egg Throw |
| Return Type: | Entity Type |
The type of the entity that will be hatched in a Player Egg Throw event.
Examples:
on player egg throw:
set the hatching entity type to a primed tnt
set the hatching entity type to a primed tnt
| Patterns: |
|
| Since: | 2.7 |
| Usable in events: | Egg Throw |
| Return Type: |
The number of entities that will be hatched in a Player Egg Throw event.
Please note that no more than 127 entities can be hatched at once.
Please note that no more than 127 entities can be hatched at once.
Examples:
on player egg throw:
set the hatching number to 10
set the hatching number to 10
| Patterns: |
|
| Since: | 2.0 |
| Return Type: | Location |
The location of an entity's head, mostly useful for players and e.g. looping blocks in the player's line of sight.
Please note that this location is only accurate for entities whose head is exactly above their center, i.e. players, endermen, zombies, skeletons, etc., but not sheep, pigs or cows.
Please note that this location is only accurate for entities whose head is exactly above their center, i.e. players, endermen, zombies, skeletons, etc., but not sheep, pigs or cows.
Examples:
set the block at the player's head to air
set the block in front of the player's eyes to glass
loop blocks in front of the player's head:
set the block in front of the player's eyes to glass
loop blocks in front of the player's head:
| Patterns: |
|
| Since: | 2.5.1 |
| Usable in events: | heal |
| Return Type: |
The amount of health healed in a heal event.
Examples:
on player healing:
increase the heal amount by 2
remove 0.5 from the healing amount
increase the heal amount by 2
remove 0.5 from the healing amount
| Patterns: |
|
| Since: | 2.5 |
| Usable in events: | heal |
| Return Type: | Heal Reason |
The heal reason of a heal event.
Examples:
on heal:
heal reason is satiated
send "You ate enough food and gained full health back!"
heal reason is satiated
send "You ate enough food and gained full health back!"
| Patterns: |
|
| Since: | 1.0 |
| Usable in events: | damage |
| Return Type: | Number |
The health of a creature, e.g. a player, mob, villager, etc. The minimum value is 0, and the maximum is the creature's max health (e.g. 10 for players).
Examples:
message "You have %health% HP left."
| Patterns: | |
| Since: | 2.3 |
| Return Type: | Player |
The players hidden from a player that were hidden using the entity visibility effect.
Examples:
message "<light red>You are currently hiding: <light gray>%hidden players of the player%"
| Patterns: |
|
| Since: | 2.10 |
| Return Type: |
Gets and/or sets the (max) domestication of a horse.
The domestication of a horse is how close a horse is to becoming tame - the higher the domestication, the closer they are to becoming tame (must be between 1 and the max domestication level of the horse).
The max domestication of a horse is how long it will take for a horse to become tame (must be greater than 0).
The domestication of a horse is how close a horse is to becoming tame - the higher the domestication, the closer they are to becoming tame (must be between 1 and the max domestication level of the horse).
The max domestication of a horse is how long it will take for a horse to become tame (must be greater than 0).
Examples:
function domesticateAndTame(horse: entity, p: offline player, i: int = 10):
add {_i} to domestication level of {_horse}
if domestication level of {_horse} >= max domestication level of {_horse}:
tame {_horse}
set tamer of {_horse} to {_p}
add {_i} to domestication level of {_horse}
if domestication level of {_horse} >= max domestication level of {_horse}:
tame {_horse}
set tamer of {_horse} to {_p}
| Patterns: |
|
| Since: | 2.5 |
| Return Type: |
The hotbar button clicked in an inventory click event.
Examples:
on inventory click:
send "You clicked the hotbar button %hotbar button%!"
send "You clicked the hotbar button %hotbar button%!"
| Patterns: | |
| Since: | 2.2-dev36 |
| Return Type: | Slot |
The currently selected hotbar slot.
To retrieve its number use Slot Index expression.
Use future and past tense to grab the previous slot in an item change event, see example.
To retrieve its number use Slot Index expression.
Use future and past tense to grab the previous slot in an item change event, see example.
Examples:
message "%player's current hotbar slot%"
set player's selected hotbar slot to slot 4 of player
send "index of player's current hotbar slot = 1" # second slot from the left
on item held change:
if the selected hotbar slot was a diamond:
set the currently selected hotbar slot to slot 5 of player
set player's selected hotbar slot to slot 4 of player
send "index of player's current hotbar slot = 1" # second slot from the left
on item held change:
if the selected hotbar slot was a diamond:
set the currently selected hotbar slot to slot 5 of player
| Patterns: |
|
| Since: | 2.3 |
| Usable in events: | server list ping |
| Requirements: | Paper 1.12.2 or newer |
| Return Type: | Text |
The list when you hover on the player counts of the server in the server list.
This can be changed using texts or players in a server list ping event only. Adding players to the list means adding the name of the players.
And note that, for example if there are 5 online players (includes fake online count) in the server and the hover list is set to 3 values, Minecraft will show "... and 2 more ..." at end of the list.
This can be changed using texts or players in a server list ping event only. Adding players to the list means adding the name of the players.
And note that, for example if there are 5 online players (includes fake online count) in the server and the hover list is set to 3 values, Minecraft will show "... and 2 more ..." at end of the list.
Examples:
on server list ping:
clear the hover list
add "&aWelcome to the &6Minecraft &aserver!" to the hover list
add "" to the hover list # A blank line
add "&cThere are &6%online players count% &conline players!" to the hover list
clear the hover list
add "&aWelcome to the &6Minecraft &aserver!" to the hover list
add "" to the hover list # A blank line
add "&cThere are &6%online players count% &conline players!" to the hover list
| Patterns: | |
| Since: | 1.4, 2.2-dev26 (when used in connect event), 2.3 (when used in server list ping event) |
| Return Type: | Text |
The IP address of a player, or the connected player in a connect event, or the pinger in a server list ping event.
Examples:
ban the IP address of the player
broadcast "Banned the IP %IP of player%"
on connect:
log "[%now%] %player% (%ip%) is connected to the server."
on server list ping:
send "%IP-address%" to the console
broadcast "Banned the IP %IP of player%"
on connect:
log "[%now%] %player% (%ip%) is connected to the server."
on server list ping:
send "%IP-address%" to the console
| Patterns: | |
| Since: | 2.1, 2.12 (indices, positions of list) |
| Return Type: | Object |
Get the first, last or all positions of a character (or text) in another text using 'positions of %text% in %text%'. Nothing is returned when the value does not occur in the text. Positions range from 1 to the length of the text (inclusive).
Using 'indices/positions of %objects% in %objects%', you can get the indices or positions of a list where the value at that index is the provided value. Indices are only supported for keyed expressions (e.g. variable lists) and will return the string indices of the given value. Positions can be used with any list and will return the numerical position of the value in the list, counting up from 1. As well, nothing is returned if the value is not found in the list.
Using 'indices/positions of %objects% in %objects%', you can get the indices or positions of a list where the value at that index is the provided value. Indices are only supported for keyed expressions (e.g. variable lists) and will return the string indices of the given value. Positions can be used with any list and will return the numerical position of the value in the list, counting up from 1. As well, nothing is returned if the value is not found in the list.
Examples:
set {_first} to the first position of "@" in the text argument
if {_s} contains "abc":
set {_s} to the first (position of "abc" in {_s} + 3) characters of {_s}
# removes everything after the first "abc" from {_s}
set {_list::*} to 1, 2, 3, 1, 2, 3
set {_indices::*} to indices of the value 1 in {_list::*}
# {_indices::*} is now "1" and "4"
set {_indices::*} to all indices of the value 2 in {_list::*}
# {_indices::*} is now "2" and "5"
set {_positions::*} to all positions of the value 3 in {_list::*}
# {_positions::*} is now 3 and 6
set {_otherlist::bar} to 100
set {_otherlist::hello} to "hi"
set {_otherlist::burb} to 100
set {_otherlist::tud} to "hi"
set {_otherlist::foo} to 100
set {_indices::*} to the first index of the value 100 in {_otherlist::*}
# {_indices::*} is now "bar"
set {_indices::*} to the last index of the value 100 in {_otherlist::*}
# {_indices::*} is now "foo"
set {_positions::*} to all positions of the value 100 in {_otherlist::*}
# {_positions::*} is now 1, 3 and 5
set {_positions::*} to all positions of the value "hi" in {_otherlist::*}
# {_positions::*} is now 2 and 4
if {_s} contains "abc":
set {_s} to the first (position of "abc" in {_s} + 3) characters of {_s}
# removes everything after the first "abc" from {_s}
set {_list::*} to 1, 2, 3, 1, 2, 3
set {_indices::*} to indices of the value 1 in {_list::*}
# {_indices::*} is now "1" and "4"
set {_indices::*} to all indices of the value 2 in {_list::*}
# {_indices::*} is now "2" and "5"
set {_positions::*} to all positions of the value 3 in {_list::*}
# {_positions::*} is now 3 and 6
set {_otherlist::bar} to 100
set {_otherlist::hello} to "hi"
set {_otherlist::burb} to 100
set {_otherlist::tud} to "hi"
set {_otherlist::foo} to 100
set {_indices::*} to the first index of the value 100 in {_otherlist::*}
# {_indices::*} is now "bar"
set {_indices::*} to the last index of the value 100 in {_otherlist::*}
# {_indices::*} is now "foo"
set {_positions::*} to all positions of the value 100 in {_otherlist::*}
# {_positions::*} is now 1, 3 and 5
set {_positions::*} to all positions of the value "hi" in {_otherlist::*}
# {_positions::*} is now 2 and 4
| Patterns: | |
| Since: | 2.4 (indices), 2.6.1 (sorting) |
| Return Type: | Text |
Returns all the indices of a list variable, optionally sorted by their values.
To sort the indices, all objects in the list must be comparable;
Otherwise, this expression will just return the unsorted indices.
To sort the indices, all objects in the list must be comparable;
Otherwise, this expression will just return the unsorted indices.
Examples:
set {l::*} to "some", "cool" and "values" broadcast "%indices of {l::*}%" # result is 1, 2 and 3", " set {_leader-board::first} to 17 set {_leader-board::third} to 30 set {_leader-board::second} to 25 set {_leader-board::fourth} to 42 set {_ascending-indices::*} to sorted indices of {_leader-board::*} in ascending order broadcast "%{_ascending-indices::*}%" #result is first, second, third, fourth set {_descending-indices::*} to sorted indices of {_leader-board::*} in descending order broadcast "%{_descending-indices::*}%" #result is fourth, third, second, first
| Patterns: |
|
| Since: | 2.2-dev32d |
| Return Type: |
A number representing positive infinity.
Examples:
if {_number} is infinity:
| Patterns: |
|
| Since: | 2.8.0 |
| Usable in events: | Inventory Item Move |
| Return Type: | Inventory |
Returns the initiator inventory in an on inventory item move event.
Examples:
on inventory item move:
holder of event-initiator-inventory is a chest
broadcast "Item transport happening at %location at holder of event-initiator-inventory%!"
holder of event-initiator-inventory is a chest
broadcast "Item transport happening at %location at holder of event-initiator-inventory%!"
| Patterns: |
|
| Since: | 2.2-dev36, 2.9.0 (input index) |
| Return Type: | Object |
Represents the input in a filter expression or sort effect.
For example, if you ran 'broadcast "something" and "something else" where [input is "something"]
the condition would be checked twice, using "something" and "something else" as the inputs.
The 'input index' pattern can be used when acting on a variable to access the index of the input.
For example, if you ran 'broadcast "something" and "something else" where [input is "something"]
the condition would be checked twice, using "something" and "something else" as the inputs.
The 'input index' pattern can be used when acting on a variable to access the index of the input.
Examples:
send "congrats on being staff!" to all players where [input has permission "staff"]
sort {_list::*} based on length of input index
sort {_list::*} based on length of input index
| Patterns: |
|
| Since: | 1.0 |
| Return Type: | Object |
The inventory of a block or player. You can usually omit this expression and can directly add or remove items to/from blocks or players.
Examples:
add a plank to the player's inventory
clear the player's inventory
remove 5 wool from the inventory of the clicked block
clear the player's inventory
remove 5 wool from the inventory of the clicked block
| Patterns: |
|
| Since: | 2.2-dev16 |
| Return Type: | Inventory Action |
The inventory action of an inventory event. Please click on the link for more information.
Examples:
inventory action is pickup all
| Patterns: |
|
| Since: | 2.8.0 |
| Usable in events: | Inventory Close |
| Requirements: | Paper |
| Return Type: | Inventory Close Reasons |
The inventory close reason of an inventory close event.
Examples:
on inventory close:
inventory close reason is teleport
send "Your inventory closed due to teleporting!" to player
inventory close reason is teleport
send "Your inventory closed due to teleporting!" to player
| Patterns: |
|
| Since: | 2.2-dev34, 2.5 (slots) |
| Return Type: | Object |
Gets the amount of rows/slots, viewers and holder of an inventory.
NOTE: 'Viewers' expression returns a list of players viewing the inventory. Note that a player is considered to be viewing their own inventory and internal crafting screen even when said inventory is not open.
NOTE: 'Viewers' expression returns a list of players viewing the inventory. Note that a player is considered to be viewing their own inventory and internal crafting screen even when said inventory is not open.
Examples:
event-inventory's amount of rows
holder of player's top inventory
{_inventory}'s viewers
holder of player's top inventory
{_inventory}'s viewers
| Patterns: | |
| Since: | 2.2-dev24 |
| Return Type: | Slot |
Represents a slot in an inventory. It can be used to change the item in an inventory too.
Examples:
if slot 0 of player is air:
set slot 0 of player to 2 stones
remove 1 stone from slot 0 of player
add 2 stones to slot 0 of player
clear slot 1 of player
set slot 0 of player to 2 stones
remove 1 stone from slot 0 of player
add 2 stones to slot 0 of player
clear slot 1 of player
| Patterns: |
|
| Since: | 2.12 |
| Return Type: | Boolean |
An expression to obtain the inverse value of a boolean
Examples:
set {_gravity} to inverse of player's flight mode
| Patterns: |
|
| Since: | unknown (before 2.1) |
| Return Type: | Item |
The item involved in an event, e.g. in a drop, dispense, pickup or craft event.
Examples:
on dispense:
item is a clock
set the time to 6:00
item is a clock
set the time to 6:00
| Patterns: |
|
| Since: | 2.2-dev24 |
| Return Type: |
The amount of an item stack.
Examples:
send "You have got %item amount of player's tool% %player's tool% in your hand!" to player
| Patterns: |
|
| Since: | 2.8.0 2.12 (cooldown group) |
| Requirements: | MC 1.21.2 (cooldown group) |
| Return Type: | Timespan |
Gets the current cooldown of a provided item for a player. If the provided item has a cooldown group component specified the cooldown of the group will be prioritized. Otherwise the cooldown of the item material will be used.
Examples:
on right click using stick:
set item cooldown of player's tool for player to 1 minute
set item cooldown of stone and grass for all players to 20 seconds
reset item cooldown of cobblestone and dirt for all players
set item cooldown of player's tool for player to 1 minute
set item cooldown of stone and grass for all players to 20 seconds
reset item cooldown of cobblestone and dirt for all players
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Item Display Transforms |
Returns or changes the item display transform of item displays.
Examples:
set the item transform of the last spawned item display to first person left handed
set the item transform of the last spawned item display to no transform # Reset to default
set the item transform of the last spawned item display to no transform # Reset to default
| Patterns: |
|
| Since: | 2.2-dev36 |
| Return Type: | Enchantment Type |
All the enchantments an item type has.
Examples:
clear enchantments of event-item
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Item Flag |
The item flags of an item. Can be modified.
Examples:
set item flags of player's tool to hide enchants and hide attributes
add hide potion effects to item flags of player's held item
remove hide enchants from item flags of {legendary sword}
add hide potion effects to item flags of player's held item
remove hide enchants from item flags of {legendary sword}
| Patterns: | |
| Since: | 2.2-dev35, 2.2-dev36 (improved), 2.5.2 (throwable projectiles), 2.10 (item displays) |
| Return Type: | Slot |
An item associated with an entity. For dropped item entities, it gets the item that was dropped.
For item frames, the item inside the frame is returned.
For throwable projectiles (snowballs, enderpearls etc.) or item displays, it gets the displayed item.
Other entities do not have items associated with them.
For item frames, the item inside the frame is returned.
For throwable projectiles (snowballs, enderpearls etc.) or item displays, it gets the displayed item.
Other entities do not have items associated with them.
Examples:
item of event-entity
set the item inside of event-entity to a diamond sword named "Example"
set the item inside of event-entity to a diamond sword named "Example"
| Patterns: |
|
| Since: | 2.5 2.12 (boolean/string/color support) |
| Requirements: | Minecraft 1.21.4+ (boolean/string/color support) |
| Return Type: | Item Type |
Get an item with custom model data.
Examples:
give player a diamond sword with custom model data 2
set slot 1 of inventory of player to wooden hoe with custom model data 357
give player a diamond hoe with custom model data 2, true, true, "scythe", and rgb(0,0,100)
set slot 1 of inventory of player to wooden hoe with custom model data 357
give player a diamond hoe with custom model data 2, true, true, "scythe", and rgb(0,0,100)
| Patterns: |
|
| Since: | 2.10 |
| Requirements: | Spigot 1.20.5+ |
| Return Type: | Item Type |
Get an item with or without enchantment glint.
Examples:
set {_item with glint} to diamond with enchantment glint
set {_item without glint} to diamond without enchantment glint
set {_item without glint} to diamond without enchantment glint
| Patterns: |
|
| Since: | 2.10, 2.11 (all itemflags) |
| Return Type: | Item Type |
Creates a new item with the specified item flags.
Examples:
give player diamond sword with item flags hide enchants and hide attributes
set {_item} to player's tool with item flag hide additional tooltip
give player torch with hide placed on item flag
set {_item} to diamond sword with all item flags
set {_item} to player's tool with item flag hide additional tooltip
give player torch with hide placed on item flag
set {_item} to diamond sword with all item flags
| Patterns: | |
| Since: | 2.3 |
| Return Type: | Item Type |
Returns the given item type with the specified lore added to it.
If multiple strings are passed, each of them will be a separate line in the lore.
If multiple strings are passed, each of them will be a separate line in the lore.
Examples:
set {_test} to stone with lore "line 1" and "line 2"
give {_test} to player
give {_test} to player
| Patterns: |
|
| Since: | 2.11 |
| Requirements: | Minecraft 1.20.5+ |
| Return Type: | Item Type |
Get an item with or without entire/additional tooltip.
If changing the 'entire' tooltip of an item, nothing will show up when a player hovers over it.
If changing the 'additional' tooltip, only specific parts (which change per item) will be hidden.
If changing the 'entire' tooltip of an item, nothing will show up when a player hovers over it.
If changing the 'additional' tooltip, only specific parts (which change per item) will be hidden.
Examples:
set {_item with additional tooltip} to diamond with additional tooltip
set {_item without entire tooltip} to diamond without entire tooltip
set {_item without entire tooltip} to diamond without entire tooltip
| Patterns: |
|
| Since: | 1.0 pre-5 |
| Return Type: | Item Type |
Items or blocks of a specific type, useful for looping.
Examples:
loop tag values of tag "diamond_ores" and tag values of tag "oak_logs":
block contains loop-item
message "Theres at least one %loop-item% in this block"
drop all blocks at the player # drops one of every block at the player
block contains loop-item
message "Theres at least one %loop-item% in this block"
drop all blocks at the player # drops one of every block at the player
| Patterns: |
|
| Since: | 2.0, 2.8.0 (specific types of items) |
| Return Type: | Slot |
All items or specific type(s) of items in an inventory. Useful for looping or storing in a list variable.
Please note that the positions of the items in the inventory are not saved, only their order is preserved.
Please note that the positions of the items in the inventory are not saved, only their order is preserved.
Examples:
loop all items in the player's inventory:
loop-item is enchanted
remove loop-item from the player
set {inventory::%uuid of player%::*} to items in the player's inventory
loop-item is enchanted
remove loop-item from the player
set {inventory::%uuid of player%::*} to items in the player's inventory
| Patterns: |
|
| Since: | 2.1, 2.5.2 (regex support), 2.7 (case sensitivity), 2.10 (without trailing string) |
| Return Type: | Text |
Joins several texts with a common delimiter (e.g. ", "), or splits a text into multiple texts at a given delimiter.
Examples:
message "Online players: %join all players' names with "" | ""%" # %all players% would use the default "x, y, and z"
set {_s::*} to the string argument split at ","
set {_s::*} to the string argument split at ","
| Patterns: |
|
| Since: | 2.12 |
| Return Type: | Object |
This expression is used to explicitly pass the keys of an expression alongside its values.
For example, when setting a list variable or passing an expression to a function.
For example, when setting a list variable or passing an expression to a function.
Examples:
set {_first::foo} to "value1" set {_first::bar} to "value2" set {_second::*} to keyed {_first::*} # {_second::foo} is "value1" and {_second::bar} is "value2"
function indices(objects: objects) returns strings: return indices of {_objects::*} on load: set {_list::foo} to "value1" set {_list::bar} to "value2" set {_list::baz} to "value3" broadcast indices({_list::*}) # "1", "2", "3" broadcast indices(keyed {_list::*}) # "foo", "bar", "baz"
function plusOne(numbers: numbers) returns numbers: loop {_numbers::*}: set {_numbers::%loop-index%} to loop-value + 1 return {_numbers::*} on load: set {_numbers::foo} to 1 set {_numbers::bar} to 2 set {_numbers::baz} to 3 set {_result::*} to keyed plusOne(keyed {_numbers::*}) # {_result::foo} is 2, {_result::bar} is 3, {_result::baz} is 4
function indices(objects: objects) returns strings: return indices of {_objects::*} on load: set {_list::foo} to "value1" set {_list::bar} to "value2" set {_list::baz} to "value3" broadcast indices({_list::*}) # "1", "2", "3" broadcast indices(keyed {_list::*}) # "foo", "bar", "baz"
function plusOne(numbers: numbers) returns numbers: loop {_numbers::*}: set {_numbers::%loop-index%} to loop-value + 1 return {_numbers::*} on load: set {_numbers::foo} to 1 set {_numbers::bar} to 2 set {_numbers::baz} to 3 set {_result::*} to keyed plusOne(keyed {_numbers::*}) # {_result::foo} is 2, {_result::bar} is 3, {_result::baz} is 4
| Patterns: | |
| Since: | 2.3 |
| Return Type: | Text |
Currently selected game language of a player. The value of the language is not defined properly.
The vanilla Minecraft client will use lowercase language / country pairs separated by an underscore, but custom resource packs may use any format they wish.
The vanilla Minecraft client will use lowercase language / country pairs separated by an underscore, but custom resource packs may use any format they wish.
Examples:
message player's current language
| Patterns: |
|
| Since: | 2.12 |
| Return Type: | Text |
Gets the last caught runtime errors from a 'catch runtime errors' section.
Examples:
catch runtime errors: set worldborder center of {_border} to location(0, 0, NaN value) if last caught runtime errors contains "Your location can't have a NaN value as one of its components": set worldborder center of {_border} to location(0, 0, 0)
| Patterns: |
|
| Since: | 2.5.1 |
| Return Type: | Number |
The last damage that was done to an entity. Note that changing it doesn't deal more/less damage.
Examples:
set last damage of event-entity to 2
| Patterns: |
|
| Since: | 2.2-Fixes-V10 |
| Return Type: | Damage Cause |
Cause of last damage done to an entity
Examples:
set last damage cause of event-entity to fire tick
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Location |
Gets the last death location of a player, or offline player, if available.
Can also be set, reset, and deleted if the player is online.
Can also be set, reset, and deleted if the player is online.
Examples:
set {_loc} to the last death location of player
teleport player to last death location of (random element out of all players)
teleport player to last death location of (random element out of all players)
| Patterns: |
|
| Since: | 2.3 |
| Requirements: | Paper 1.12.2 or newer |
| Return Type: | Server Icon |
Returns the last loaded server icon with the load server icon effect.
Examples:
set {server-icon} to the last loaded server icon
| Patterns: | |
| Since: | 2.4 |
| Requirements: | Paper 1.9 or newer |
| Return Type: | Resource Pack State |
Returns the last resource pack response received from a player.
Examples:
if player's last resource pack response is deny or download fail:
| Patterns: |
|
| Since: | 1.3 (spawned entity), 2.0 (shot entity), 2.2-dev26 (dropped item), 2.7 (struck lightning, firework) |
| Return Type: | Entity |
Holds the entity that was spawned most recently with the spawn effect (section), dropped with the drop effect, shot with the shoot effect or created with the lightning effect. Please note that even though you can spawn multiple mobs simultaneously (e.g. with 'spawn 5 creepers'), only the last spawned mob is saved and can be used. If you spawn an entity, shoot a projectile and drop an item you can however access all them together.
Examples:
spawn a priest
set {healer::%spawned priest%} to true
shoot an arrow from the last spawned entity
ignite the shot projectile
drop a diamond sword
push last dropped item upwards
teleport player to last struck lightning
delete last launched firework
set {healer::%spawned priest%} to true
shoot an arrow from the last spawned entity
ignite the shot projectile
drop a diamond sword
push last dropped item upwards
teleport player to last struck lightning
delete last launched firework
| Patterns: |
|
| Since: | 2.5 |
| Return Type: | Date |
When a player last/first logged in the server. 'last login' requires paper to get the last login, otherwise it will get the last time they were seen on the server.
Examples:
command /onlinefor:
trigger:
send "You have been online for %difference between player's last login and now%."
send "You first joined the server %difference between player's first login and now% ago."
trigger:
send "You have been online for %difference between player's last login and now%."
send "You first joined the server %difference between player's first login and now% ago."
| Patterns: |
|
| Since: | 2.3 |
| Return Type: | Entity |
The leash holder of a living entity.
Examples:
set {_example} to the leash holder of the target mob
| Patterns: | |
| Since: | unknown (before 2.1) |
| Usable in events: | level change |
| Return Type: |
The level of a player.
Examples:
reduce the victim's level by 1
set the player's level to 0
set the player's level to 0
| Patterns: | |
| Since: | 2.0 |
| Usable in events: | level change |
| Return Type: | Number |
The player's progress in reaching the next level, this represents the experience bar in the game. Please note that this value is between 0 and 1 (e.g. 0.5 = half experience bar).
Changing this value can cause the player's level to change if the resulting level progess is negative or larger than 1, e.g.
Changing this value can cause the player's level to change if the resulting level progess is negative or larger than 1, e.g.
increase the player's level progress by 0.5 will make the player gain a level if their progress was more than 50%. Examples:
# use the exp bar as mana
on rightclick with a blaze rod:
player's level progress is larger than 0.2
shoot a fireball from the player
reduce the player's level progress by 0.2
every 2 seconds:
loop all players:
level progress of loop-player is smaller than 0.9:
increase level progress of the loop-player by 0.1
else:
set level progress of the loop-player to 0.99
on xp spawn:
cancel event
on rightclick with a blaze rod:
player's level progress is larger than 0.2
shoot a fireball from the player
reduce the player's level progress by 0.2
every 2 seconds:
loop all players:
level progress of loop-player is smaller than 0.9:
increase level progress of the loop-player by 0.1
else:
set level progress of the loop-player to 0.99
on xp spawn:
cancel event
| Patterns: | |
| Since: | 1.3.4 |
| Return Type: |
Gets the light level at a certain location which ranges from 0 to 15.
It can be separated into sunlight (15 = direct sunlight, 1-14 = indirect) and block light (torches, glowstone, etc.). The total light level of a block is the maximum of the two different light types.
It can be separated into sunlight (15 = direct sunlight, 1-14 = indirect) and block light (torches, glowstone, etc.). The total light level of a block is the maximum of the two different light types.
Examples:
# set vampire players standing in bright sunlight on fire
every 5 seconds:
loop all players:
{vampire::%uuid of loop-player%} is true
sunlight level at the loop-player is greater than 10
ignite the loop-player for 5 seconds
every 5 seconds:
loop all players:
{vampire::%uuid of loop-player%} is true
sunlight level at the loop-player is greater than 10
ignite the loop-player for 5 seconds
| Patterns: |
|
| Since: | 2.7 |
| Return Type: | Text |
An expression to obtain a list of the names of the server's loaded plugins.
Examples:
if the loaded plugins contains "Vault":
broadcast "This server uses Vault plugin!"
send "Plugins (%size of loaded plugins%): %plugins%" to player
broadcast "This server uses Vault plugin!"
send "Plugins (%size of loaded plugins%): %plugins%" to player
| Patterns: |
|
| Since: | 2.0 |
| Return Type: | Location |
The location where an event happened (e.g. at an entity or block), or a location relative to another (e.g. 1 meter above another location).
Examples:
drop 5 apples at the event-location # exactly the same as writing 'drop 5 apples'
set {_loc} to the location 1 meter above the player
set {_loc} to the location 1 meter above the player
| Patterns: |
|
| Since: | 2.0 |
| Return Type: | Location |
The location where an event happened (e.g. at an entity or block), or a location relative to another (e.g. 1 meter above another location).
Examples:
drop 5 apples at the event-location # exactly the same as writing 'drop 5 apples'
set {_loc} to the location 1 meter above the player
set {_loc} to the location 1 meter above the player
| Patterns: | |
| Since: | Unknown |
| Return Type: | Location |
The location of a block or entity. This not only represents the x, y and z coordinates of the location but also includes the world and the direction an entity is looking (e.g. teleporting to a saved location will make the teleported entity face the same saved direction every time).
Please note that the location of an entity is at it's feet, use head location to get the location of the head.
Please note that the location of an entity is at it's feet, use head location to get the location of the head.
Examples:
set {home::%uuid of player%} to the location of the player
message "You home was set to %player's location% in %player's world%."
message "You home was set to %player's location% in %player's world%."
| Patterns: |
|
| Since: | 2.8.0 |
| Return Type: |
Returns the loop's current iteration count (for both normal and while loops).
Examples:
while player is online:
give player 1 stone
wait 5 ticks
if loop-counter > 30:
stop loop
loop {top-balances::*}:
if loop-iteration <= 10:
broadcast "#%loop-iteration% %loop-index% has $%loop-value%"
give player 1 stone
wait 5 ticks
if loop-counter > 30:
stop loop
loop {top-balances::*}:
if loop-iteration <= 10:
broadcast "#%loop-iteration% %loop-index% has $%loop-value%"
| Patterns: |
|
| Since: | 1.0, 2.8.0 (loop-counter), 2.10 (previous, next) |
| Return Type: | Object |
Returns the previous, current, or next looped value.
Examples:
# Countdown
loop 10 times:
message "%11 - loop-number%"
wait a second
# Generate a 10x10 floor made of randomly colored wool below the player
loop blocks from the block below the player to the block 10 east of the block below the player:
loop blocks from the loop-block to the block 10 north of the loop-block:
set loop-block-2 to any wool
loop {top-balances::*}:
loop-iteration <= 10
send "#%loop-iteration% %loop-index% has $%loop-value%"
loop shuffled (integers between 0 and 8):
if all:
previous loop-value = 1
loop-value = 4
next loop-value = 8
then:
kill all players
loop 10 times:
message "%11 - loop-number%"
wait a second
# Generate a 10x10 floor made of randomly colored wool below the player
loop blocks from the block below the player to the block 10 east of the block below the player:
loop blocks from the loop-block to the block 10 north of the loop-block:
set loop-block-2 to any wool
loop {top-balances::*}:
loop-iteration <= 10
send "#%loop-iteration% %loop-index% has $%loop-value%"
loop shuffled (integers between 0 and 8):
if all:
previous loop-value = 1
loop-value = 4
next loop-value = 8
then:
kill all players
| Patterns: |
|
| Since: | 2.7 |
| Requirements: | MC 1.16+ |
| Return Type: | Item |
The loot that will be generated in a 'loot generate' event.
Examples:
on loot generate:
chance of %10
add 64 diamonds to loot
send "You hit the jackpot!!"
chance of %10
add 64 diamonds to loot
send "You hit the jackpot!!"
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Loot Context |
The loot context involved in the context create section.
Examples:
set {_context} to a new loot context at {_location}:
broadcast loot context
broadcast loot context
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Location |
Returns the loot location of a loot context.
Examples:
set {_player} to player
set {_context} to a loot context at player:
if {_player} is in "world_nether":
set loot location to location of last spawned pig
send loot location of {_context} to player
set {_context} to a loot context at player:
if {_player} is in "world_nether":
set loot location to location of last spawned pig
send loot location of {_context} to player
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Loot Table |
Returns the loot table of an entity or block.
Setting the loot table of a block will update the block state, and once opened will generate loot of the specified loot table. Please note that doing so may cause warnings in the console due to over-filling the chest.
Please note that resetting/deleting the loot table of an ENTITY will reset the entity's loot table to its default.
Setting the loot table of a block will update the block state, and once opened will generate loot of the specified loot table. Please note that doing so may cause warnings in the console due to over-filling the chest.
Please note that resetting/deleting the loot table of an ENTITY will reset the entity's loot table to its default.
Examples:
set loot table of event-entity to "minecraft:entities/ghast"
# this will set the loot table of the entity to a ghast's loot table, thus dropping ghast tears and gunpowder
set loot table of event-block to "minecraft:chests/simple_dungeon"
# this will set the loot table of the entity to a ghast's loot table, thus dropping ghast tears and gunpowder
set loot table of event-block to "minecraft:chests/simple_dungeon"
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Loot Table |
Returns the loot table from a namespaced key.
Examples:
set {_table} to loot table "minecraft:chests/simple_dungeon"
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Item |
Returns the items of a loot table using a loot context. Not specifying a loot context will use a loot context with a location at the world's origin.
Examples:
set {_items::*} to loot items of the loot table "minecraft:chests/simple_dungeon" with loot context {_context}
# this will set {_items::*} to the items that would be dropped from the simple dungeon loot table with the given loot context
give player loot items of entity's loot table with loot context {_context}
# this will give the player the items that the entity would drop with the given loot context
# this will set {_items::*} to the items that would be dropped from the simple dungeon loot table with the given loot context
give player loot items of entity's loot table with loot context {_context}
# this will give the player the items that the entity would drop with the given loot context
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Entity |
Returns the looted entity of a loot context.
Examples:
set {_entity} to looted entity of {_context}
set {_context} to a loot context at player:
set loot luck value to 10
set looter to player
set looted entity to last spawned pig
set {_context} to a loot context at player:
set loot luck value to 10
set looter to player
set looted entity to last spawned pig
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Player |
Returns the looter of a loot context. Note that setting the looter will read the looter's tool enchantments (e.g. looting) when generating loot.
Examples:
set {_killer} to looter of {_context}
set {_context} to a loot context at player:
set loot luck value to 10
set looter to player
set looted entity to last spawned pig
set {_context} to a loot context at player:
set loot luck value to 10
set looter to player
set looted entity to last spawned pig
| Patterns: |
|
| Since: | 2.1 |
| Return Type: | Text |
An item's lore.
Examples:
set the 1st line of the item's lore to "<orange>Excalibur 2.0"
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Timespan |
The amount of time the animals have been in love for. Using a value of 30 seconds is equivalent to using an item to breed them.
Only works on animals that can be bred and returns '0 seconds' for animals that can't be bred.
Only works on animals that can be bred and returns '0 seconds' for animals that can't be bred.
Examples:
on right click:
send "%event-entity% has been in love for %love time of event-entity% more than you!" to player
send "%event-entity% has been in love for %love time of event-entity% more than you!" to player
| Patterns: | |
| Since: | 2.2-dev34, 2.9.0 (lowest solid block, 'non-air' option removed, additional syntax option) |
| Return Type: | Block |
An expression to obtain the lowest or highest solid (impassable) block at a location.
Note that the y-coordinate of the location is not taken into account for this expression.
Note that the y-coordinate of the location is not taken into account for this expression.
Examples:
teleport the player to the block above the highest block at the player
set the highest solid block at the player's location to the lowest solid block at the player's location
set the highest solid block at the player's location to the lowest solid block at the player's location
| Patterns: |
|
| Since: | 2.10 |
| Return Type: |
Returns the luck of a loot context as a float. This represents the luck potion effect that an entity can have.
Examples:
set {_luck} to loot luck value of {_context}
set {_context} to a loot context at player:
set loot luck value to 10
set looter to player
set looted entity to last spawned pig
set {_context} to a loot context at player:
set loot luck value to 10
set looter to player
set looted entity to last spawned pig
| Patterns: |
|
| Since: | 2.3 |
| Return Type: | Text |
The message of the day in the server list. This can be changed in a server list ping event only.
'default MOTD' returns the default MOTD always and can't be changed.
'default MOTD' returns the default MOTD always and can't be changed.
Examples:
on server list ping:
set the motd to "Join now!"
set the motd to "Join now!"
| Patterns: |
|
| Since: | 2.5, 2.9.0 (change) |
| Requirements: | Minecraft 1.20.5+ (custom amount) |
| Return Type: |
The maximum durability of an item. Changing requires Minecraft 1.20.5+
Note: 'delete' will remove the max durability from the item (making it a non-damageable item). Delete requires Paper 1.21+
Note: 'delete' will remove the max durability from the item (making it a non-damageable item). Delete requires Paper 1.21+
Examples:
maximum durability of diamond sword
if max durability of player's tool is not 0: # Item is damageable
set max durability of player's tool to 5000
add 5 to max durability of player's tool
reset max durability of player's tool
delete max durability of player's tool
if max durability of player's tool is not 0: # Item is damageable
set max durability of player's tool to 5000
add 5 to max durability of player's tool
reset max durability of player's tool
delete max durability of player's tool
| Patterns: |
|
| Since: | 2.0 |
| Usable in events: | damage, death |
| Return Type: | Number |
The maximum health of an entity, e.g. 10 for a player.
Examples:
on join:
set the maximum health of the player to 100
spawn a giant
set the last spawned entity's max health to 1000
set the maximum health of the player to 100
spawn a giant
set the last spawned entity's max health to 1000
| Patterns: |
|
| Since: | 2.8.0 |
| Requirements: | Paper |
| Return Type: | Timespan |
Returns the max duration an item can be used for before the action completes. E.g. it takes 1.6 seconds to drink a potion, or 1.4 seconds to load an unenchanted crossbow.
Some items, like bows and shields, do not have a limit to their use. They will return 1 hour.
Some items, like bows and shields, do not have a limit to their use. They will return 1 hour.
Examples:
on right click:
broadcast max usage duration of player's tool
broadcast max usage duration of player's tool
| Patterns: |
|
| Since: | 2.3, 2.7 (modify max real players) |
| Requirements: | Paper 1.16+ (modify max real players) |
| Return Type: |
The count of max players. This can be changed in a server list ping event only.
'real max players' returns the real count of max players of the server and can be modified on Paper 1.16 or later.
'real max players' returns the real count of max players of the server and can be modified on Paper 1.16 or later.
Examples:
on server list ping:
set the max players count to (online players count + 1)
set the max players count to (online players count + 1)
| Patterns: | |
| Since: | 2.7 |
| Return Type: | Timespan |
The maximum amount of time an entity can spend in powdered snow before taking damage.
Examples:
difference between player's freeze time and player's max freeze time is less than 1 second:
send "you're about to freeze!" to the player
send "you're about to freeze!" to the player
| Patterns: |
|
| Since: | 2.1, 2.10 (changeable, inventories) |
| Requirements: | Spigot 1.20.5+ (changeable) |
| Return Type: |
The maximum stack size of an item (e.g. 64 for torches, 16 for buckets, 1 for swords, etc.) or inventory.
In 1.20.5+, the maximum stack size of items can be changed to any integer from 1 to 99, and stacked up to the maximum stack size of the inventory they're in.
In 1.20.5+, the maximum stack size of items can be changed to any integer from 1 to 99, and stacked up to the maximum stack size of the inventory they're in.
Examples:
send "You can hold %max stack size of player's tool% of %type of player's tool% in a slot." to player
set the maximum stack size of inventory of all players to 16
add 8 to the maximum stack size of player's tool
reset the maximum stack size of {_gui}
set the maximum stack size of inventory of all players to 16
add 8 to the maximum stack size of player's tool
reset the maximum stack size of {_gui}
| Patterns: |
|
| Since: | 2.1.1 |
| Return Type: | Player |
A 'me' expression that can be used in players' effect commands only.
Examples:
!heal me
!kick myself
!give a diamond axe to me
!kick myself
!give a diamond axe to me
| Patterns: |
|
| Since: | 2.5.1 |
| Return Type: |
The number of durability points an item is to be repaired in a mending event.
Modifying the repair amount will affect how much experience is given to the player after mending.
Modifying the repair amount will affect how much experience is given to the player after mending.
Examples:
on item mend:
set the mending repair amount to 100
set the mending repair amount to 100
| Patterns: |
|
| Since: | 1.4.6 (chat message), 1.4.9 (join & quit messages), 2.0 (death message), 2.9.0 (clear message), 2.10 (broadcasted message) |
| Usable in events: | chat, join, quit, death, broadcast |
| Return Type: | Text |
The (chat) message of a chat event, the join message of a join event, the quit message of a quit event, the death message of a death event or the broadcasted message in a broadcast event. This expression is mostly useful for being changed.
Examples:
on chat:
player has permission "admin"
set message to "&c%message%"
on first join:
set join message to "Welcome %player% to our awesome server!"
on join:
player has played before
set join message to "Welcome back, %player%!"
on quit:
if {vanish::%player's uuid%} is set:
clear quit message
else:
set quit message to "%player% left this awesome server!"
on death:
set the death message to "%player% died!"
on broadcast:
set broadcast message to "&a[BROADCAST] %broadcast message%"
player has permission "admin"
set message to "&c%message%"
on first join:
set join message to "Welcome %player% to our awesome server!"
on join:
player has played before
set join message to "Welcome back, %player%!"
on quit:
if {vanish::%player's uuid%} is set:
clear quit message
else:
set quit message to "%player% left this awesome server!"
on death:
set the death message to "%player% died!"
on broadcast:
set broadcast message to "&a[BROADCAST] %broadcast message%"
| Patterns: |
|
| Since: | 2.2-dev36, 2.10 (add, remove) |
| Return Type: | Object |
Metadata is a way to store temporary data on entities, blocks and more that disappears after a server restart.
Examples:
set metadata value "healer" of player to true
broadcast "%metadata value ""healer"" of player%"
clear metadata value "healer" of player
broadcast "%metadata value ""healer"" of player%"
clear metadata value "healer" of player
| Patterns: | |
| Since: | 2.6.1 |
| Return Type: | Location |
Returns the middle/center of a location. In other words, returns the middle of the X, Z coordinates and the floor value of the Y coordinate of a location.
Examples:
command /stuck:
executable by: players
trigger:
teleport player to the center of player's location
send "You're no longer stuck."
executable by: players
trigger:
teleport player to the center of player's location
send "You're no longer stuck."
| Patterns: | |
| Since: | 2.5.1 |
| Return Type: | Vector |
The velocity of a minecart as soon as it has been derailed or as soon as it starts flying.
Examples:
on right click on minecart:
set derailed velocity of event-entity to vector 2, 10, 2
set derailed velocity of event-entity to vector 2, 10, 2
| Patterns: |
|
| Since: | 2.0, 2.5 (offline players) |
| Requirements: | Vault, an economy plugin that supports Vault |
| Return Type: | Money |
How much virtual money a player has (can be changed).
Examples:
message "You have %player's money%" # the currency name will be added automatically
remove 20$ from the player's balance # replace '$' by whatever currency you use
add 200 to the player's account # or omit the currency altogether
remove 20$ from the player's balance # replace '$' by whatever currency you use
add 200 to the player's account # or omit the currency altogether
| Patterns: | |
| Since: | 2.7 |
| Requirements: | Paper 1.16+ |
| Return Type: | Moon Phase |
The current moon phase of a world.
Examples:
if moon phase of player's world is full moon:
send "Watch for the wolves!"
send "Watch for the wolves!"
| Patterns: |
|
| Since: | 2.2-dev27 |
| Return Type: | Block |
Blocks which are moved in a piston event. Cannot be used outside of piston events.
Examples:
the moved blocks
| Patterns: |
|
| Since: | 2.2-dev32d |
| Return Type: |
A number representing an undefined value. NaN occurs as a result of illegal math, like dividing 0 by 0.
NaN is deliberately not equal to any other number, including itself.
NaN is deliberately not equal to any other number, including itself.
Examples:
if {_number} is not {_number}:
if isNaN({_number}) is true:
if isNaN({_number}) is true:
| Patterns: |
|
| Since: | before 2.1 2.2-dev20 (inventory name) 2.4 (non-living entity support, changeable inventory name) 2.7 (worlds) |
| Return Type: | Text |
Represents the Minecraft account, display or tab list name of a player, or the custom name of an item, entity, block, inventory, gamerule, world, script or function.
Players:
Name: The Minecraft account name of the player. Can't be changed, but 'display name' can be changed.
Display Name: The name of the player that is displayed in messages. This name can be changed freely and can include color codes, and is shared among all plugins (e.g. chat plugins will use the display name).
Entities:
Name: The custom name of the entity. Can be changed. But for living entities, the players will have to target the entity to see its name tag. For non-living entities, the name will not be visible at all. To prevent this, use 'display name'.
Display Name: The custom name of the entity. Can be changed, which will also enable custom name visibility of the entity so name tag of the entity will be visible always.
Items:
Name and Display Name: The custom name of the item (not the Minecraft locale name). Can be changed.
Inventories:
Name and Display Name: The name/title of the inventory. Changing name of an inventory means opening the same inventory with the same contents but with a different name to its current viewers.
Gamerules:
Name: The name of the gamerule. Cannot be changed.
Worlds:
Name: The name of the world. Cannot be changed.
Scripts:
Name: The name of a script, excluding its file extension.
Players:
Name: The Minecraft account name of the player. Can't be changed, but 'display name' can be changed.
Display Name: The name of the player that is displayed in messages. This name can be changed freely and can include color codes, and is shared among all plugins (e.g. chat plugins will use the display name).
Entities:
Name: The custom name of the entity. Can be changed. But for living entities, the players will have to target the entity to see its name tag. For non-living entities, the name will not be visible at all. To prevent this, use 'display name'.
Display Name: The custom name of the entity. Can be changed, which will also enable custom name visibility of the entity so name tag of the entity will be visible always.
Items:
Name and Display Name: The custom name of the item (not the Minecraft locale name). Can be changed.
Inventories:
Name and Display Name: The name/title of the inventory. Changing name of an inventory means opening the same inventory with the same contents but with a different name to its current viewers.
Gamerules:
Name: The name of the gamerule. Cannot be changed.
Worlds:
Name: The name of the world. Cannot be changed.
Scripts:
Name: The name of a script, excluding its file extension.
Examples:
on join:
player has permission "name.red"
set the player's display name to "<red>[admin] <gold>%name of player%"
set the player's tab list name to "<green>%player's name%"
set the name of the player's tool to "Legendary Sword of Awesomeness"
player has permission "name.red"
set the player's display name to "<red>[admin] <gold>%name of player%"
set the player's tab list name to "<green>%player's name%"
set the name of the player's tool to "Legendary Sword of Awesomeness"
| Patterns: |
|
| Since: | 2.0, 2.2-dev34 (inventories) |
| Return Type: | Object |
Directly names an item/inventory, useful for defining a named item/inventory in a script. If you want to (re)name existing items/inventories you can either use this expression or use
set name of <item/inventory> to <text>. Examples:
give a diamond sword of sharpness 100 named "<gold>Excalibur" to the player
set tool of player to the player's tool named "<gold>Wand"
set the name of the player's tool to "<gold>Wand"
open hopper inventory named "Magic Hopper" to player
set tool of player to the player's tool named "<gold>Wand"
set the name of the player's tool to "<gold>Wand"
open hopper inventory named "Magic Hopper" to player
| Patterns: |
|
| Since: | 2.7 |
| Return Type: | Entity |
Gets the entity nearest to a location or another entity.
Examples:
kill the nearest pig and cow relative to player
teleport player to the nearest cow relative to player
teleport player to the nearest entity relative to player
on click:
kill nearest pig
teleport player to the nearest cow relative to player
teleport player to the nearest entity relative to player
on click:
kill nearest pig
| Patterns: |
|
| Since: | 2.2-dev32d |
| Return Type: |
A number representing negative infinity.
Examples:
if {_number} is -infinity:
| Patterns: |
|
| Since: | 2.5 |
| Return Type: | Text |
Returns a line break separator.
Examples:
send "Hello%nl%Goodbye!" to player
| Patterns: |
|
| Since: | 2.5, 2.11 (deprecated) |
| Return Type: |
The number of ticks that an entity is invulnerable to damage for.
Examples:
on damage:
set victim's invulnerability ticks to 20 #Victim will not take damage for the next second
set victim's invulnerability ticks to 20 #Victim will not take damage for the next second
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Timespan |
The amount of time an entity is invulnerable to any damage.
Examples:
on damage:
set victim's invulnerability time to 20 ticks #Victim will not take damage for the next second
if the no damage timespan of {_entity} is 0 seconds:
set the invincibility time span of {_entity} to 1 minute
set victim's invulnerability time to 20 ticks #Victim will not take damage for the next second
if the no damage timespan of {_entity} is 0 seconds:
set the invincibility time span of {_entity} to 1 minute
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Node |
Returns a node inside a config (or another section-node).
Nodes in Skript configs are written in the format `key: value`.
Section nodes can contain other nodes.
Nodes in Skript configs are written in the format `key: value`.
Section nodes can contain other nodes.
Examples:
set {_node} to node "language" in the skript config if text value of {_node} is "french": broadcast "Bonjour!"
set {_script} to the current script loop nodes of the current script: broadcast name of loop-value
set {_script} to the current script loop nodes of the current script: broadcast name of loop-value
| Patterns: |
|
| Since: | 1.4 |
| Return Type: | Date |
Examples:
broadcast "Current server time: %now%"
| Patterns: | |
| Since: | 2.5 |
| Return Type: |
The number of uppercase, lowercase, or digit characters in a string.
Examples:
#Simple Chat Filter
on chat:
if number of uppercase chars in message / length of message > 0.5
cancel event
send "<red>Your message has to many caps!" to player
on chat:
if number of uppercase chars in message / length of message > 0.5
cancel event
send "<red>Your message has to many caps!" to player
| Patterns: | |
| Since: | 1.4.6 (integers & numbers), 2.5.1 (decimals) |
| Return Type: | Number |
All numbers between two given numbers, useful for looping.
Use 'numbers' if your start is not an integer and you want to keep the fractional part of the start number constant, or use 'integers' if you only want to loop integers.
You may also use 'decimals' if you want to use the decimal precision of the start number.
You may want to use the 'times' expression instead, for instance 'loop 5 times:'
Use 'numbers' if your start is not an integer and you want to keep the fractional part of the start number constant, or use 'integers' if you only want to loop integers.
You may also use 'decimals' if you want to use the decimal precision of the start number.
You may want to use the 'times' expression instead, for instance 'loop 5 times:'
Examples:
loop numbers from 2.5 to 5.5: # loops 2.5, 3.5, 4.5, 5.5
loop integers from 2.9 to 5.1: # same as '3 to 5', i.e. loops 3, 4, 5
loop decimals from 3.94 to 4: # loops 3.94, 3.95, 3.96, 3.97, 3.98, 3.99, 4
loop integers from 2.9 to 5.1: # same as '3 to 5', i.e. loops 3, 4, 5
loop decimals from 3.94 to 4: # loops 3.94, 3.95, 3.96, 3.97, 3.98, 3.99, 4
| Patterns: |
|
| Since: | 2.2-dev35 |
| Return Type: | Offline Player |
All players that have ever joined the server. This includes the players currently online.
Examples:
send "Size of all players who have joined the server: %size of all offline players%"
| Patterns: |
|
| Since: | 2.3 |
| Requirements: | Paper (fake count) |
| Return Type: |
The amount of online players. This can be changed in a server list ping event only to show fake online player amount.
real online player count always return the real count of online players and can't be changed. Examples:
on server list ping:
# This will make the max players count 5 if there are 4 players online.
set the fake max players count to (online player count + 1)
# This will make the max players count 5 if there are 4 players online.
set the fake max players count to (online player count + 1)
| Patterns: | |
| Since: | 2.2-dev24, 2.2-dev35 (Just 'current inventory' works in player events) |
| Return Type: | Inventory |
Return the currently opened inventory of a player.
If no inventory is open, it returns the own player's crafting inventory.
If no inventory is open, it returns the own player's crafting inventory.
Examples:
set slot 1 of player's current inventory to diamond sword
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Gene |
The main or hidden gene of a panda.
Examples:
if the main gene of last spawned panda is lazy: set the main gene of last spawned panda to playful
| Patterns: | |
| Since: | 2.0 |
| Return Type: | Object |
Parses text as a given type, or as a given pattern.
This expression can be used in two different ways: One which parses the entire text as a single instance of a type, e.g. as a number, and one that parses the text according to a pattern.
If the given text could not be parsed, this expression will return nothing and the parse error will be set if some information is available.
Some notes about parsing with a pattern:
- The pattern must be a Skript pattern, e.g. percent signs are used to define where to parse which types, e.g. put a %number% or %items% in the pattern if you expect a number or some items there.
- You have to save the expression's value in a list variable, e.g.
- The list variable will contain the parsed values from all %types% in the pattern in order. If a type was plural, e.g. %items%, the variable's value at the respective index will be a list variable, e.g. the values will be stored in {parsed::1::*}, not {parsed::1}.
This expression can be used in two different ways: One which parses the entire text as a single instance of a type, e.g. as a number, and one that parses the text according to a pattern.
If the given text could not be parsed, this expression will return nothing and the parse error will be set if some information is available.
Some notes about parsing with a pattern:
- The pattern must be a Skript pattern, e.g. percent signs are used to define where to parse which types, e.g. put a %number% or %items% in the pattern if you expect a number or some items there.
- You have to save the expression's value in a list variable, e.g.
set {parsed::*} to message parsed as "...".- The list variable will contain the parsed values from all %types% in the pattern in order. If a type was plural, e.g. %items%, the variable's value at the respective index will be a list variable, e.g. the values will be stored in {parsed::1::*}, not {parsed::1}.
Examples:
set {var} to line 1 parsed as number
on chat:
set {var::*} to message parsed as "buying %items% for %money%"
if parse error is set:
message "%parse error%"
else if {var::*} is set:
cancel event
remove {var::2} from the player's balance
give {var::1::*} to the player
on chat:
set {var::*} to message parsed as "buying %items% for %money%"
if parse error is set:
message "%parse error%"
else if {var::*} is set:
cancel event
remove {var::2} from the player's balance
give {var::1::*} to the player
| Patterns: |
|
| Since: | 2.0 |
| Return Type: | Text |
The error which caused the last parse operation to fail, which might not be set if a pattern was used and the pattern didn't match the provided text at all.
Examples:
set {var} to line 1 parsed as integer
if {var} is not set:
parse error is set:
message "<red>Line 1 is invalid: %last parse error%"
else:
message "<red>Please put an integer on line 1!"
if {var} is not set:
parse error is set:
message "<red>Line 1 is invalid: %last parse error%"
else:
message "<red>Please put an integer on line 1!"
| Patterns: | |
| Since: | 2.0, 2.2-dev26 (Multiple passengers for 1.11.2+) |
| Return Type: | Entity |
The passenger of a vehicle, or the rider of a mob.
For 1.11.2 and above, it returns a list of passengers and you can use all changers in it.
See also: vehicle
For 1.11.2 and above, it returns a list of passengers and you can use all changers in it.
See also: vehicle
Examples:
#for 1.11 and lower
passenger of the minecart is a creeper or a cow
the saddled pig's passenger is a player
#for 1.11.2+
passengers of the minecart contains a creeper or a cow
the boat's passenger contains a pig
add a cow and a zombie to passengers of last spawned boat
set passengers of player's vehicle to a pig and a horse
remove all pigs from player's vehicle
clear passengers of boat
passenger of the minecart is a creeper or a cow
the saddled pig's passenger is a player
#for 1.11.2+
passengers of the minecart contains a creeper or a cow
the boat's passenger contains a pig
add a cow and a zombie to passengers of last spawned boat
set passengers of player's vehicle to a pig and a horse
remove all pigs from player's vehicle
clear passengers of boat
| Patterns: | |
| Since: | 2.8.0 |
| Return Type: | Number |
Returns a percentage of one or more numbers.
Examples:
set damage to 10% of victim's health
set damage to 125 percent of damage
set {_result} to {_percent} percent of 999
set {_result::*} to 10% of {_numbers::*}
set experience to 50% of player's total experience
set damage to 125 percent of damage
set {_result} to {_percent} percent of 999
set {_result::*} to 10% of {_numbers::*}
set experience to 50% of player's total experience
| Patterns: |
|
| Since: | 2.7 |
| Return Type: |
Returns the mathematical constant pi. (approx. 3.1415926535)
Examples:
set {_tau} to pi * 2
| Patterns: | |
| Since: | 2.2-dev36 |
| Return Type: |
Pings of players, as Minecraft server knows them. Note that they will almost certainly be different from the ones you'd get from using ICMP echo requests. This expression is only supported on some server software (PaperSpigot).
Examples:
command /ping <player=%player%>:
trigger:
send "%arg-1%'s ping is %arg-1's ping%"
trigger:
send "%arg-1%'s ping is %arg-1's ping%"
| Patterns: |
|
| Since: | 2.6 |
| Return Type: | Item Type |
A plain item is an item with no modifications. It can be used to convert items to their default state or to match with other default items.
Examples:
if the player's tool is a plain diamond: # check if player's tool has no modifications
send "You are holding a plain diamond!"
send "You are holding a plain diamond!"
| Patterns: | |
| Since: | 2.10 |
| Requirements: | Spigot 1.19+ |
| Return Type: | Text |
The custom chat completion suggestions. You can add, set, remove, and clear them. Removing the names of online players with this expression is ineffective.
This expression will not return anything due to Bukkit limitations.
This expression will not return anything due to Bukkit limitations.
Examples:
add "Skript" and "Njol" to chat completions of all players
remove "text" from {_p}'s chat completions
clear player's chat completions
remove "text" from {_p}'s chat completions
clear player's chat completions
| Patterns: | |
| Since: | 2.6.2 |
| Requirements: | Paper 1.12.2 or newer |
| Return Type: |
Player's protocol version. For more information and list of protocol versions visit wiki.vg.
Examples:
command /protocolversion <player>:
trigger:
send "Protocol version of %arg-1%: %protocol version of arg-1%"
trigger:
send "Protocol version of %arg-1%: %protocol version of arg-1%"
| Patterns: |
|
| Since: | 2.0 |
| Return Type: | Item Type |
Gets a skull item representing a player. Skulls for other entities are provided by the aliases.
Examples:
give the victim's skull to the attacker
set the block at the entity to the entity's skull
set the block at the entity to the entity's skull
| Patterns: |
|
| Since: | 2.4 |
| Usable in events: | portal_create |
| Return Type: | Block |
The blocks associated with a portal in the portal creation event.
Examples:
on portal creation:
loop portal blocks:
broadcast "%loop-block% is part of a portal!"
loop portal blocks:
broadcast "%loop-block% is part of a portal!"
| Patterns: | |
| Since: | 2.8.0 |
| Return Type: | Timespan |
The amount of time before an entity can use a portal. By default, it is 15 seconds after exiting a nether portal or end gateway.
Players in survival/adventure get a cooldown of 0.5 seconds, while those in creative get no cooldown.
Resetting will set the cooldown back to the default 15 seconds for non-player entities and 0.5 seconds for players.
Players in survival/adventure get a cooldown of 0.5 seconds, while those in creative get no cooldown.
Resetting will set the cooldown back to the default 15 seconds for non-player entities and 0.5 seconds for players.
Examples:
on portal:
wait 1 tick
set portal cooldown of event-entity to 5 seconds
wait 1 tick
set portal cooldown of event-entity to 5 seconds
| Patterns: |
|
| Since: | 2.5.2 |
| Return Type: | Potion Effect |
Create a new potion effect to apply to an entity or item type. Do note that when applying potion effects
to tipped arrows/lingering potions, Minecraft reduces the timespan.
to tipped arrows/lingering potions, Minecraft reduces the timespan.
Examples:
set {_p} to potion effect of speed of tier 1 without particles for 10 minutes
add {_p} to potion effects of player's tool
add {_p} to potion effects of target entity
add potion effect of speed 1 to potion effects of player
add {_p} to potion effects of player's tool
add {_p} to potion effects of target entity
add potion effect of speed 1 to potion effects of player
| Patterns: |
|
| Since: | 2.7 |
| Return Type: |
An expression to obtain the amplifier of a potion effect applied to an entity.
Examples:
if the amplifier of haste of player >= 3:
| Patterns: |
|
| Since: | 2.5.2 |
| Return Type: | Potion Effect |
Represents the active potion effects of entities and itemtypes.
You can clear all potion effects of an entity/itemtype and add/remove a potion effect/type to/from an entity/itemtype.
Do note you will not be able to clear the base potion effects of a potion item. In that case, just set the item to a water bottle.
When adding a potion effect type (rather than a potion effect), it will default to 15 seconds with tier 1.
You can clear all potion effects of an entity/itemtype and add/remove a potion effect/type to/from an entity/itemtype.
Do note you will not be able to clear the base potion effects of a potion item. In that case, just set the item to a water bottle.
When adding a potion effect type (rather than a potion effect), it will default to 15 seconds with tier 1.
Examples:
set {_p::*} to active potion effects of player
clear all the potion effects of player
clear all the potion effects of player's tool
add potion effects of player to potion effects of player's tool
add speed to potion effects of target entity
remove speed and night vision from potion effects of player
clear all the potion effects of player
clear all the potion effects of player's tool
add potion effects of player to potion effects of player's tool
add speed to potion effects of target entity
remove speed and night vision from potion effects of player
| Patterns: | |
| Since: | 2.0, 2.10 (delete) |
| Requirements: | Vault, a chat plugin that supports Vault |
| Return Type: | Text |
The prefix or suffix as defined in the server's chat plugin.
Examples:
on chat:
cancel event
broadcast "%player's prefix%%player's display name%%player's suffix%: %message%" to the player's world
set the player's prefix to "[<red>Admin<reset>] "
clear player's prefix
cancel event
broadcast "%player's prefix%%player's display name%%player's suffix%: %message%" to the player's world
set the player's prefix to "[<red>Admin<reset>] "
clear player's prefix
| Patterns: |
|
| Since: | 2.5.1 |
| Return Type: | Boolean |
A projectile's critical state. The only currently accepted projectiles are arrows and tridents.
Examples:
on shoot:
event-projectile is an arrow
set projectile critical mode of event-projectile to true
event-projectile is an arrow
set projectile critical mode of event-projectile to true
| Patterns: |
|
| Since: | 2.11 |
| Return Type: |
Returns the force at which a projectile was shot within an entity shoot bow event.
Examples:
on entity shoot projectile: set the velocity of shooter to vector(0,1,0) * projectile force
| Patterns: |
|
| Since: | 2.3 |
| Usable in events: | server list ping |
| Requirements: | Paper 1.12.2 or newer |
| Return Type: |
The protocol version that will be sent as the protocol version of the server in a server list ping event. For more information and list of protocol versions visit wiki.vg.
If this protocol version doesn't match with the protocol version of the client, the client will see the version string.
But please note that, this expression has no visual effect over the version string. For example if the server uses PaperSpigot 1.12.2, and you make the protocol version 107 (1.9),
the version string will not be "Paper 1.9", it will still be "Paper 1.12.2".
But then you can customize the version string as you wish.
Also if the protocol version of the player is higher than protocol version of the server, it will say
"Server out of date!", and if vice-versa "Client out of date!" when you hover on the ping bars.
This can be set in a server list ping event only
(increase and decrease effects cannot be used because that wouldn't make sense).
If this protocol version doesn't match with the protocol version of the client, the client will see the version string.
But please note that, this expression has no visual effect over the version string. For example if the server uses PaperSpigot 1.12.2, and you make the protocol version 107 (1.9),
the version string will not be "Paper 1.9", it will still be "Paper 1.12.2".
But then you can customize the version string as you wish.
Also if the protocol version of the player is higher than protocol version of the server, it will say
"Server out of date!", and if vice-versa "Client out of date!" when you hover on the ping bars.
This can be set in a server list ping event only
(increase and decrease effects cannot be used because that wouldn't make sense).
Examples:
on server list ping:
set the version string to "<light green>Version: <orange>%minecraft version%"
set the protocol version to 0 # 13w41a (1.7) - so the player will see the custom version string almost always
set the version string to "<light green>Version: <orange>%minecraft version%"
set the protocol version to 0 # 13w41a (1.7) - so the player will see the custom version string almost always
| Patterns: |
|
| Since: | 2.10 (experimental) |
| Return Type: | Queue |
Requires the
using queues experimental feature flag to be enabled.Creates a new queue. A queue is a set of elements that can have things removed from the start and added to the end.
Any value can be added to a queue. Adding a non-existent value (e.g. `{variable that isn't set}`) will have no effect. This means that removing an element from the queue will always return a value unless the queue is empty.
Requesting an element from a queue (e.g. `the 1st element of {queue}`) also removes it from the queue.
Examples:
set {queue} to a new queue add "hello" and "there" to {queue} broadcast the first element of {queue} # hello broadcast the first element of {queue} # there # queue is now empty
set {queue} to a new queue of "hello" and "there" broadcast the last element of {queue} # removes 'there' add "world" to {queue} broadcast the first 2 elements of {queue} # removes 'hello', 'world'
set {queue} to a new queue of "hello" and "there" broadcast the last element of {queue} # removes 'there' add "world" to {queue} broadcast the first 2 elements of {queue} # removes 'hello', 'world'
| Patterns: | |
| Since: | 2.10 (experimental) |
| Return Type: | Object |
Requires the
using queues experimental feature flag to be enabled.The first or last element in a queue. Asking for this does not remove the element from the queue.
This is designed for use with the add changer: to add or remove elements from the start or the end of the queue.
Examples:
set {queue} to a new queue add "hello" to {queue} add "foo" to the start of {queue} broadcast the first element of {queue} # foo broadcast the first element of {queue} # hello # queue is now empty
| Patterns: |
|
| Since: | 2.8.0 |
| Requirements: | Paper 1.16.5+ |
| Return Type: | Quit Reason |
The quit reason as to why a player disconnected in a quit event.
Examples:
on quit:
quit reason was kicked
player is banned
clear {server::player::%uuid of player%::*}
quit reason was kicked
player is banned
clear {server::player::%uuid of player%::*}
| Patterns: | |
| Since: | 2.8.0 |
| Return Type: | Text |
One or more random characters between two given characters. Use 'alphanumeric' if you want only alphanumeric characters.
This expression uses the Unicode numerical code of a character to determine which characters are between the two given characters.
If strings of more than one character are given, only the first character of each is used.
This expression uses the Unicode numerical code of a character to determine which characters are between the two given characters.
If strings of more than one character are given, only the first character of each is used.
Examples:
set {_captcha} to join (5 random characters between "a" and "z") with ""
send 3 random alphanumeric characters between "0" and "z"
send 3 random alphanumeric characters between "0" and "z"
| Patterns: | |
| Since: | 1.4, 2.10 (Multiple random numbers) |
| Return Type: | Number |
A given amount of random numbers or integers between two given numbers. Use 'number' if you want any number with decimal parts, or use use 'integer' if you only want whole numbers.
Please note that the order of the numbers doesn't matter, i.e.
Please note that the order of the numbers doesn't matter, i.e.
random number between 2 and 1 will work as well as random number between 1 and 2. Examples:
set the player's health to a random number between 5 and 10
send "You rolled a %random integer from 1 to 6%!" to the player
set {_chances::*} to 5 random integers between 5 and 96
set {_decimals::*} to 3 random numbers between 2.7 and -1.5
send "You rolled a %random integer from 1 to 6%!" to the player
set {_chances::*} to 5 random integers between 5 and 96
set {_decimals::*} to 3 random numbers between 2.7 and -1.5
| Patterns: |
|
| Since: | 2.5.1, 2.11 (return UUIDs) |
| Return Type: | UUID |
Returns a random UUID.
Examples:
set {_uuid} to random uuid
| Patterns: |
|
| Since: | unknown (2.2) |
| Return Type: | Text |
The raw Minecraft material name of the given item. Note that this is not guaranteed to give same results on all servers.
Examples:
raw name of tool of player
| Patterns: |
|
| Since: | 2.8.0 |
| Usable in events: | ready arrow |
| Return Type: | Item |
The bow or arrow in a Ready Arrow event.
Examples:
on player ready arrow:
selected bow's name is "Spectral Bow"
if selected arrow is not a spectral arrow:
cancel event
selected bow's name is "Spectral Bow"
if selected arrow is not a spectral arrow:
cancel event
| Patterns: | |
| Since: | 2.1 |
| Requirements: | Supported regions plugin |
| Return Type: | Offline Player |
A list of members or owners of a region.
This expression requires a supported regions plugin to be installed.
This expression requires a supported regions plugin to be installed.
Examples:
on entering of a region:
message "You're entering %region% whose owners are %owners of region%"
message "You're entering %region% whose owners are %owners of region%"
| Patterns: | |
| Since: | 2.1 |
| Requirements: | Supported regions plugin |
| Return Type: | Region |
All regions at a particular location.
This expression requires a supported regions plugin to be installed.
This expression requires a supported regions plugin to be installed.
Examples:
On click on a sign:
line 1 of the clicked block is "[region info]"
set {_regions::*} to regions at the clicked block
if {_regions::*} is empty:
message "No regions exist at this sign."
else:
message "Regions containing this sign: <gold>%{_regions::*}%<r>."
line 1 of the clicked block is "[region info]"
set {_regions::*} to regions at the clicked block
if {_regions::*} is empty:
message "No regions exist at this sign."
else:
message "Regions containing this sign: <gold>%{_regions::*}%<r>."
| Patterns: |
|
| Since: | 2.0 |
| Return Type: | Timespan |
How much time a player has left underwater before starting to drown.
Examples:
if the player's remaining air is less than 3 seconds:
send "hurry, get to the surface!" to the player
send "hurry, get to the surface!" to the player
| Patterns: | |
| Since: | 2.9.0 |
| Requirements: | Spigot 1.19.4+ |
| Return Type: | Timespan |
Returns the resonating time of a bell.
A bell will start resonating five game ticks after being rung, and will continue to resonate for 40 game ticks.
A bell will start resonating five game ticks after being rung, and will continue to resonate for 40 game ticks.
Examples:
broadcast "The bell has been resonating for %resonating time of target block%"
| Patterns: |
|
| Since: | 2.2-dev35 |
| Return Type: | Location |
The location that a player should respawn at. This is used within the respawn event.
Examples:
on respawn:
set respawn location to {example::spawn}
set respawn location to {example::spawn}
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Object |
Runs something (like a function) and returns its result.
If the thing is expected to return multiple values, use 'results' instead of 'result'.
If the thing is expected to return multiple values, use 'results' instead of 'result'.
Examples:
set {_function} to the function named "myFunction"
set {_result} to the result of {_function}
set {_list::*} to the results of {_function}
set {_result} to the result of {_function} with arguments 13 and true
set {_result} to the result of {_function}
set {_list::*} to the results of {_function}
set {_result} to the result of {_function} with arguments 13 and true
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Object |
Rotates a quaternion or vector around an axis a set amount of degrees, or around all 3 axes at once.
Vectors can only be rotated around the global X/Y/Z axes, or an arbitrary vector axis.
Quaternions are more flexible, allowing rotation around the global or local X/Y/Z axes, arbitrary vectors, or all 3 local axes at once.
Global axes are the ones in the Minecraft world. Local axes are relative to how the quaternion is already oriented.
Note that rotating a quaternion around a vector results in a rotation around the local vector, so results may not be what you expect. For example, rotating around vector(1, 0, 0) is the same as rotating around the local X axis.
The same applies to rotations by all three axes at once. In addition, rotating around all three axes of a quaternion/display at once will rotate in ZYX order, meaning the Z rotation will be applied first and the X rotation last.
Vectors can only be rotated around the global X/Y/Z axes, or an arbitrary vector axis.
Quaternions are more flexible, allowing rotation around the global or local X/Y/Z axes, arbitrary vectors, or all 3 local axes at once.
Global axes are the ones in the Minecraft world. Local axes are relative to how the quaternion is already oriented.
Note that rotating a quaternion around a vector results in a rotation around the local vector, so results may not be what you expect. For example, rotating around vector(1, 0, 0) is the same as rotating around the local X axis.
The same applies to rotations by all three axes at once. In addition, rotating around all three axes of a quaternion/display at once will rotate in ZYX order, meaning the Z rotation will be applied first and the X rotation last.
Examples:
set {_new} to {_quaternion} rotated around x axis by 10 degrees
set {_new} to {_vector} rotated around vector(1, 1, 1) by 45
set {_new} to {_quaternion} rotated by x 45, y 90, z 135
set {_new} to {_vector} rotated around vector(1, 1, 1) by 45
set {_new} to {_quaternion} rotated by x 45, y 90, z 135
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Object |
Returns the axis or angle that a quaternion will rotate by/around.
All quaternions can be represented by a rotation of some amount around some axis, so this expression provides the ability to get that angle/axis.
All quaternions can be represented by a rotation of some amount around some axis, so this expression provides the ability to get that angle/axis.
Examples:
set {_quaternion} to axisAngle(45, vector(1, 2, 3))
send rotation axis of {_quaternion} # 1, 2, 3
send rotation angle of {_quaternion} # 45
set rotation angle of {_quaternion} to 135
set rotation axis of {_quaternion} to vector(0, 1, 0)
send rotation axis of {_quaternion} # 1, 2, 3
send rotation angle of {_quaternion} # 45
set rotation angle of {_quaternion} to 135
set rotation axis of {_quaternion} to vector(0, 1, 0)
| Patterns: | |
| Since: | 2.0 |
| Return Type: |
Rounds numbers normally, up (ceiling) or down (floor) respectively.
Examples:
set {var} to rounded health of player
set line 1 of the block to rounded "%(1.5 * player's level)%"
add rounded down argument to the player's health
set line 1 of the block to rounded "%(1.5 * player's level)%"
add rounded down argument to the player's health
| Patterns: | |
| Since: | 2.2-Fixes-v10, 2.2-dev35 (fully modifiable), 2.6.2 (syntax pattern changed) |
| Return Type: | Number |
The saturation of a player. If used in a player event, it can be omitted and will default to event-player.
Examples:
set saturation of player to 20
| Patterns: | |
| Since: | 2.3 |
| Return Type: | Text |
Scoreboard tags are simple list of texts stored directly in the data of an entity.
So this is a Minecraft related thing, not Bukkit, so the tags will not get removed when the server stops. You can visit visit Minecraft Wiki for more info.
This is changeable and valid for any type of entity. Also you can use use the Has Scoreboard Tag condition to check whether an entity has the given tags.
Requires Minecraft 1.11+ (actually added in 1.9 to the game, but added in 1.11 to Spigot).
So this is a Minecraft related thing, not Bukkit, so the tags will not get removed when the server stops. You can visit visit Minecraft Wiki for more info.
This is changeable and valid for any type of entity. Also you can use use the Has Scoreboard Tag condition to check whether an entity has the given tags.
Requires Minecraft 1.11+ (actually added in 1.9 to the game, but added in 1.11 to Spigot).
Examples:
on spawn of a monster:
if the spawn reason is mob spawner:
add "spawned by a spawner" to the scoreboard tags of event-entity
on death of a monster:
if the attacker is a player:
if the victim doesn't have the scoreboard tag "spawned by a spawner":
add 1$ to attacker's balance
if the spawn reason is mob spawner:
add "spawned by a spawner" to the scoreboard tags of event-entity
on death of a monster:
if the attacker is a player:
if the victim doesn't have the scoreboard tag "spawned by a spawner":
add 1$ to attacker's balance
| Patterns: | |
| Since: | 2.0 |
| Return Type: | Script |
The current script, or a script from its (file) name.
If the script is enabled or disabled (or reloaded) this reference will become invalid.
Therefore, it is recommended to obtain a script reference when needed.
If the script is enabled or disabled (or reloaded) this reference will become invalid.
Therefore, it is recommended to obtain a script reference when needed.
Examples:
on script load:
broadcast "Loaded %the current script%"
on script load:
set {running::%script%} to true
on script unload:
set {running::%script%} to false
set {script} to the script named "weather.sk"
loop the scripts in directory "quests/":
enable loop-value
broadcast "Loaded %the current script%"
on script load:
set {running::%script%} to true
on script unload:
set {running::%script%} to false
set {script} to the script named "weather.sk"
loop the scripts in directory "quests/":
enable loop-value
| Patterns: | |
| Since: | 2.7 |
| Return Type: |
An expression to obtain or modify data relating to the pickles of a sea pickle block.
Examples:
on block break:
type of block is sea pickle
send "Wow! This stack of sea pickles contained %event-block's sea pickle count% pickles!"
send "It could've contained a maximum of %event-block's maximum sea pickle count% pickles!"
send "It had to have contained at least %event-block's minimum sea pickle count% pickles!"
cancel event
set event-block's sea pickle count to event-block's maximum sea pickle count
send "This bad boy is going to hold so many pickles now!!"
type of block is sea pickle
send "Wow! This stack of sea pickles contained %event-block's sea pickle count% pickles!"
send "It could've contained a maximum of %event-block's maximum sea pickle count% pickles!"
send "It had to have contained at least %event-block's minimum sea pickle count% pickles!"
cancel event
set event-block's sea pickle count to event-block's maximum sea pickle count
send "This bad boy is going to hold so many pickles now!!"
| Patterns: | |
| Since: | 2.10 |
| Return Type: |
Returns the seed of a loot table. Setting the seed of a block or entity that does not have a loot table will not do anything.
Examples:
set {_seed} loot table seed of block
set loot table seed of entity to 123456789
set loot table seed of entity to 123456789
| Patterns: |
|
| Since: | 2.8.0 |
| Usable in events: | send command list |
| Return Type: | Text |
The commands that will be sent to the player in a send commands to player event.
Modifications will affect what commands show up for the player to tab complete. They will not affect what commands the player can actually run.
Adding new commands to the list is illegal behavior and will be ignored.
Modifications will affect what commands show up for the player to tab complete. They will not affect what commands the player can actually run.
Adding new commands to the list is illegal behavior and will be ignored.
Examples:
on send command list:
set command list to command list where [input does not contain ":"]
remove "help" from command list
set command list to command list where [input does not contain ":"]
remove "help" from command list
| Patterns: |
|
| Since: | 2.3 |
| Requirements: | Paper 1.12.2 or newer |
| Return Type: | Server Icon |
Icon of the server in the server list. Can be set to an icon that loaded using the
load server icon effect,
or can be reset to the default icon in a server list ping.
'default server icon' returns the default server icon (server-icon.png) always and cannot be changed.
load server icon effect,
or can be reset to the default icon in a server list ping.
'default server icon' returns the default server icon (server-icon.png) always and cannot be changed.
Examples:
on script load:
set {server-icons::default} to the default server icon
set {server-icons::default} to the default server icon
| Patterns: |
|
| Since: | 1.3.7, 2.11 (entity shoot bow event) |
| Return Type: | Living Entity |
The shooter of a projectile.
Examples:
shooter is a skeleton
| Patterns: | |
| Since: | 1.3 |
| Return Type: | Text |
A line of text on a sign. Can be changed, but remember that there is a 16 character limit per line (including color codes that use 2 characters each).
Examples:
on rightclick on sign:
line 2 of the clicked block is "[Heal]":
heal the player
set line 3 to "%player%"
line 2 of the clicked block is "[Heal]":
heal the player
set line 3 to "%player%"
| Patterns: | |
| Since: | 2.11 |
| Requirements: | Paper (change for players), Paper 1.21+ (change for worlds) |
| Return Type: |
The simulation distance of a world or a player.
Simulation distance is the minimum distance in chunks for entities to tick.
Simulation distance is capped to the current view distance of the world or player.
The view distance is capped between 2 and 32 chunks.
Paper is required to change the simulation distance for both worlds and players.
Simulation distance is the minimum distance in chunks for entities to tick.
Simulation distance is capped to the current view distance of the world or player.
The view distance is capped between 2 and 32 chunks.
Paper is required to change the simulation distance for both worlds and players.
Examples:
set simulation distance of player to 10
add 50 to the simulation distance of world "world"
reset the simulation distance of player
clear the simulation distance of world "world"
add 50 to the simulation distance of world "world"
reset the simulation distance of player
clear the simulation distance of world "world"
| Patterns: |
|
| Since: | 2.11 |
| Return Type: |
The size of a world border.
The size can not be smaller than 1.
The size can not be smaller than 1.
Examples:
set world border radius of {_worldborder} to 10
| Patterns: |
|
| Since: | 2.9.0, 2.10 (of items) |
| Return Type: | Offline Player |
The skull owner of a player skull.
Examples:
set {_owner} to the skull owner of event-block
set skull owner of {_block} to "Njol" parsed as offlineplayer
set head owner of player's tool to {_player}
set skull owner of {_block} to "Njol" parsed as offlineplayer
set head owner of player's tool to {_player}
| Patterns: | |
| Since: | 2.2-dev35, 2.8.0 (raw index) |
| Return Type: |
Index of an an inventory slot. Other types of slots may or may not have indices. Note that comparing slots with numbers is also possible; if index of slot is same as the number, comparisonsucceeds. This expression is mainly for the cases where you must for some reason save the slot numbers.
Raw index of slot is unique for the view, see Minecraft Wiki
Raw index of slot is unique for the view, see Minecraft Wiki
Examples:
if index of event-slot is 10:
send "You bought a pie!"
if display name of player's top inventory is "Custom Menu": # 3 rows inventory
if raw index of event-slot > 27: # outside custom inventory
cancel event
send "You bought a pie!"
if display name of player's top inventory is "Custom Menu": # 3 rows inventory
if raw index of event-slot > 27: # outside custom inventory
cancel event
| Patterns: |
|
| Since: | 2.10 |
| Requirements: | Minecraft 1.20.2+, Minecraft 1.20.5+ (comparisons) |
| Return Type: | Entity Snapshot |
Gets or sets the entity snapshot that the provided spawn eggs will spawn when used.
Examples:
set {_item} to a zombie spawn egg
broadcast the spawn egg entity of {_item}
spawn a pig at location(0,0,0):
set the max health of entity to 20
set the health of entity to 20
set {_snapshot} to the entity snapshot of entity
clear entity
set the spawn egg entity of {_item} to {_snapshot}
if the spawn egg entity of {_item} is {_snapshot}: # Minecraft 1.20.5+
set the spawn egg entity of {_item} to (random element out of all entities)
set the spawn egg entity of {_item} to a zombie
broadcast the spawn egg entity of {_item}
spawn a pig at location(0,0,0):
set the max health of entity to 20
set the health of entity to 20
set {_snapshot} to the entity snapshot of entity
clear entity
set the spawn egg entity of {_item} to {_snapshot}
if the spawn egg entity of {_item} is {_snapshot}: # Minecraft 1.20.5+
set the spawn egg entity of {_item} to (random element out of all entities)
set the spawn egg entity of {_item} to a zombie
| Patterns: |
|
| Since: | 2.3 |
| Return Type: | Spawn Reason |
The spawn reason in a spawn event.
Examples:
on spawn:
spawn reason is reinforcements or breeding
cancel event
spawn reason is reinforcements or breeding
cancel event
| Patterns: | |
| Since: | 2.4, 2.9.2 (trial spawner), 2.12 (delete) |
| Requirements: | Minecraft 1.20.0+ (delete) |
| Return Type: | Entity Type |
The entity type of a spawner (mob spawner). Change the entity type, reset it (pig) or clear it (Minecraft 1.20.0+).
Examples:
on right click: if event-block is a spawner: send "Spawner's type if %spawner type of event-block%" to player
set the creature type of {_spawner} to a trader llama
reset {_spawner}'s entity type # Pig
clear the spawner type of {_spawner} # Minecraft 1.20.0+
set the creature type of {_spawner} to a trader llama
reset {_spawner}'s entity type # Pig
clear the spawner type of {_spawner} # Minecraft 1.20.0+
| Patterns: | |
| Since: | 2.4-alpha4, 2.7 (Paper Spectator Event) |
| Requirements: | Paper |
| Return Type: | Entity |
Grabs the spectator target entity of the players.
Examples:
on player start spectating of player:
message "&c%spectator target% currently has %{game::kills::%spectator target%}% kills!" to the player
on player stop spectating:
past spectator target was a zombie
set spectator target to the nearest skeleton
message "&c%spectator target% currently has %{game::kills::%spectator target%}% kills!" to the player
on player stop spectating:
past spectator target was a zombie
set spectator target to the nearest skeleton
| Patterns: | |
| Since: | unknown (before 2.1) |
| Return Type: | Number |
A player's walking or flying speed. Both can be changed, but values must be between -1 and 1 (excessive values will be changed to -1 or 1 respectively). Negative values reverse directions.
Please note that changing a player's speed will change their FOV just like potions do.
Please note that changing a player's speed will change their FOV just like potions do.
Examples:
set the player's walk speed to 1
increase the argument's fly speed by 0.1
increase the argument's fly speed by 0.1
| Patterns: | |
| Since: | 2.11 |
| Return Type: | Object |
Retrieve the first, the last, or all of the color objects or color codes of a string.
The retrieved color codes of the string will be formatted with the color symbol.
The retrieved color codes of the string will be formatted with the color symbol.
Examples:
set {_colors::*} to the string colors of "<red>hey<blue>yo"
set {_color} to the first string color code of "&aGoodbye!"
send "%{_color}%Howdy!" to all players
set {_color} to the first string color code of "&aGoodbye!"
send "%{_color}%Howdy!" to all players
| Patterns: |
|
| Since: | 2.1, 2.5.2 (character at, multiple strings support) |
| Return Type: | Text |
Extracts part of a text. You can either get the first <x> characters, the last <x> characters, the character at index <x>, or the characters between indices <x> and <y>. The indices <x> and <y> should be between 1 and the length of the text (other values will be fit into this range).
Examples:
set {_s} to the first 5 characters of the text argument
message "%subtext of {_s} from characters 2 to (the length of {_s} - 1)%" # removes the first and last character from {_s} and sends it to the player or console
set {_characters::*} to characters at 1, 2 and 7 in player's display name
send the last character of all players' names
message "%subtext of {_s} from characters 2 to (the length of {_s} - 1)%" # removes the first and last character from {_s} and sends it to the player or console
set {_characters::*} to characters at 1, 2 and 7 in player's display name
send the last character of all players' names
| Patterns: |
|
| Since: | 2.2-dev36 |
| Return Type: | Number |
Returns the 3 most recent TPS readings, like the /tps command. This expression is only supported on some server software (PaperSpigot).
Examples:
broadcast "%tps%"
| Patterns: |
|
| Since: | 2.10 |
| Requirements: | Paper (paper tags) |
| Return Type: | Minecraft Tag |
Represents a tag which can be used to classify items, blocks, or entities.
Tags are composed of a value and an optional namespace: "minecraft:oak_logs".
If you omit the namespace, one will be provided for you, depending on what kind of tag you're using. For example, `tag "doors"` will be the tag "minecraft:doors", while `paper tag "doors"` will be "paper:doors".
`minecraft tag` will search through the vanilla tags, `datapack tag` will search for datapack-provided tags (a namespace is required here!), `paper tag` will search for Paper's custom tags if you are running Paper, and `custom tag` will look in the "skript" namespace for custom tags you've registered.
You can also filter by tag types using "item", "block", or "entity".
Tags are composed of a value and an optional namespace: "minecraft:oak_logs".
If you omit the namespace, one will be provided for you, depending on what kind of tag you're using. For example, `tag "doors"` will be the tag "minecraft:doors", while `paper tag "doors"` will be "paper:doors".
`minecraft tag` will search through the vanilla tags, `datapack tag` will search for datapack-provided tags (a namespace is required here!), `paper tag` will search for Paper's custom tags if you are running Paper, and `custom tag` will look in the "skript" namespace for custom tags you've registered.
You can also filter by tag types using "item", "block", or "entity".
Examples:
minecraft tag "dirt" # minecraft:dirt
paper tag "doors" # paper:doors
tag "skript:custom_dirt" # skript:custom_dirt
custom tag "dirt" # skript:dirt
datapack block tag "dirt" # minecraft:dirt
datapack tag "my_pack:custom_dirt" # my_pack:custom_dirt
tag "minecraft:mineable/pickaxe" # minecraft:mineable/pickaxe
custom item tag "blood_magic_sk/can_sacrifice_with" # skript:blood_magic_sk/can_sacrifice_with
paper tag "doors" # paper:doors
tag "skript:custom_dirt" # skript:custom_dirt
custom tag "dirt" # skript:dirt
datapack block tag "dirt" # minecraft:dirt
datapack tag "my_pack:custom_dirt" # my_pack:custom_dirt
tag "minecraft:mineable/pickaxe" # minecraft:mineable/pickaxe
custom item tag "blood_magic_sk/can_sacrifice_with" # skript:blood_magic_sk/can_sacrifice_with
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Text |
The namespaced key of a minecraft tag. This takes the form of "namespace:key", e.g. "minecraft:dirt".
Examples:
broadcast namespaced keys of the tags of player's tool
if the key of {_my-tag} is "minecraft:stone":
return true
if the key of {_my-tag} is "minecraft:stone":
return true
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Object |
Returns all the values that a tag contains.
For item and block tags, this will return items. For entity tags, it will return entity datas (a creeper, a zombie).
For item and block tags, this will return items. For entity tags, it will return entity datas (a creeper, a zombie).
Examples:
broadcast tag values of minecraft tag "dirt"
broadcast (first element of player's tool's block tags)'s tag contents
broadcast (first element of player's tool's block tags)'s tag contents
| Patterns: |
|
| Since: | 2.10 |
| Requirements: | Paper (paper tags) |
| Return Type: | Minecraft Tag |
Returns all the tags of an item, block, or entity.
`minecraft tag` will return only the vanilla tags, `datapack tag` will return only datapack-provided tags, `paper tag` will return only Paper's custom tags (if you are running Paper), and `custom tag` will look in the "skript" namespace for custom tags you've registered.
You can also filter by tag types using "item", "block", or "entity".
`minecraft tag` will return only the vanilla tags, `datapack tag` will return only datapack-provided tags, `paper tag` will return only Paper's custom tags (if you are running Paper), and `custom tag` will look in the "skript" namespace for custom tags you've registered.
You can also filter by tag types using "item", "block", or "entity".
Examples:
broadcast minecraft tags of dirt
send true if paper item tags of target block contains paper tag "doors"
broadcast the block tags of player's tool
send true if paper item tags of target block contains paper tag "doors"
broadcast the block tags of player's tool
| Patterns: |
|
| Since: | 2.2-dev25 |
| Return Type: | Player |
The tamer of an entity. Can only be used in entity tame events. You can use 'event-entity' to refer tamed entity itself.
Examples:
on tame:
if the tamer is a player:
send "someone tamed something!" to console
if the tamer is a player:
send "someone tamed something!" to console
| Patterns: |
|
| Since: | 1.4.2, 2.7 (Reset), 2.8.0 (ignore blocks, ray size) |
| Return Type: | Entity |
For players this is the entity at the crosshair.
For mobs and experience orbs this is the entity they are attacking/following (if any).
The 'ray size' and 'ignoring blocks' options are only valid for players' targets.
The 'ray size' option effectively increases the area around the crosshair an entity can be in. It does so by expanding the hitboxes of entities by the given amount. Display entities have a hit box of 0, so using the 'ray size' option can be helpful when targeting them.
May grab entities in unloaded chunks.
For mobs and experience orbs this is the entity they are attacking/following (if any).
The 'ray size' and 'ignoring blocks' options are only valid for players' targets.
The 'ray size' option effectively increases the area around the crosshair an entity can be in. It does so by expanding the hitboxes of entities by the given amount. Display entities have a hit box of 0, so using the 'ray size' option can be helpful when targeting them.
May grab entities in unloaded chunks.
Examples:
on entity target:
if entity's target is a player:
send "You're being followed by an %entity%!" to target of entity
reset target of entity # Makes the entity target-less
delete targeted entity of player # for players it will delete the target
delete target of last spawned zombie # for entities it will make them target-less
if entity's target is a player:
send "You're being followed by an %entity%!" to target of entity
reset target of entity # Makes the entity target-less
delete targeted entity of player # for players it will delete the target
delete target of last spawned zombie # for entities it will make them target-less
| Patterns: |
|
| Since: | 1.0, 2.9.0 (actual/exact) |
| Return Type: | Block |
The block at the crosshair. This regards all blocks that are not air as fully solid, e.g. torches will be like a solid stone block for this expression.
The actual target block will regard the actual hit box of the block.
The actual target block will regard the actual hit box of the block.
Examples:
set target block of player to stone
set target block of player to oak_stairs[waterlogged=true]
break target block of player using player's tool
give player 1 of type of target block
teleport player to location above target block
kill all entities in radius 3 around target block of player
set {_block} to actual target block of player
break actual target block of player
set target block of player to oak_stairs[waterlogged=true]
break target block of player using player's tool
give player 1 of type of target block
teleport player to location above target block
kill all entities in radius 3 around target block of player
set {_block} to actual target block of player
break actual target block of player
| Patterns: |
|
| Since: | 2.2-dev35 |
| Return Type: | Teleport Cause |
The teleport cause within a player teleport event.
Examples:
on teleport:
teleport cause is nether portal, end portal or end gateway
cancel event
teleport cause is nether portal, end portal or end gateway
cancel event
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Display Text Alignment |
Returns or changes the alignment setting of text displays.
Examples:
set text alignment of the last spawned text display to left aligned
| Patterns: | |
| Since: | 2.10 |
| Return Type: |
Returns or changes the line width of text displays. Default is 200.
Examples:
set the line width of the last spawned text display to 300
| Patterns: | |
| Since: | 2.10 |
| Return Type: |
Returns or changes the opacity of text displays.
Values are between -127 and 127. The value of 127 represents it being completely opaque.
Values are between -127 and 127. The value of 127 represents it being completely opaque.
Examples:
set the opacity of the last spawned text display to -1 # Reset
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Text |
Returns or changes the text/string of displays.
Note that currently you can only use Skript chat codes when running Paper.
Note that currently you can only use Skript chat codes when running Paper.
Examples:
set text of the last spawned text display to "example"
| Patterns: |
|
| Since: | 2.7 |
| Usable in events: | Egg Throw |
| Return Type: | Projectile |
The egg thrown in a Player Egg Throw event.
Examples:
spawn an egg at the egg
| Patterns: | |
| Since: | 1.0 |
| Return Type: | Time |
The time of a world.
Use the "minecraft timespan" syntax to change the time according to Minecraft's time intervals.
Since Minecraft uses discrete intervals for time (ticks), changing the time by real-world minutes or real-world seconds only changes it approximately.
Removing an amount of time from a world's time will move the clock forward a day.
Use the "minecraft timespan" syntax to change the time according to Minecraft's time intervals.
Since Minecraft uses discrete intervals for time (ticks), changing the time by real-world minutes or real-world seconds only changes it approximately.
Removing an amount of time from a world's time will move the clock forward a day.
Examples:
set time of world "world" to 2:00
add 2 minecraft hours to time of world "world"
add 54 real seconds to time of world "world" # approximately 1 minecraft hour
add 2 minecraft hours to time of world "world"
add 54 real seconds to time of world "world" # approximately 1 minecraft hour
| Patterns: |
|
| Since: | 2.5, 2.7 (offline players) |
| Requirements: | MC 1.15+ (offline players) |
| Return Type: | Timespan |
The amount of time a player has played for on the server. This info is stored in the player's statistics in the main world's data folder. Changing this will also change the player's stats which can be views in the client's statistics menu.
Using this expression on offline players on Minecraft 1.14 and below will return nothing
Using this expression on offline players on Minecraft 1.14 and below will return nothing
<none>. Examples:
set {_t} to time played of player
if player's time played is greater than 10 minutes:
give player a diamond sword
set player's time played to 0 seconds
if player's time played is greater than 10 minutes:
give player a diamond sword
set player's time played to 0 seconds
| Patterns: | |
| Since: | 2.5, 2.10 (time until) |
| Return Type: | Timespan |
The time since a date has passed or the time until a date will pass.
This expression will return 0 seconds if the time since or time until would be negative, e.g. if one tries to get the time since a future date.
This expression will return 0 seconds if the time since or time until would be negative, e.g. if one tries to get the time since a future date.
Examples:
send "%time since 5 minecraft days ago% has passed since 5 minecraft days ago!" to player
send "%time until {countdown::end}% until the game begins!" to player
send "%time until {countdown::end}% until the game begins!" to player
| Patterns: |
|
| Since: | 2.9.0 |
| Return Type: |
Retrieve specific information of a timespan such as hours/minutes/etc.
Examples:
set {_t} to difference between now and {Payouts::players::%uuid of player%::last-date}
send "It has been %days of {_t}% day(s) since last payout."
send "It has been %days of {_t}% day(s) since last payout."
| Patterns: |
|
| Since: | 1.0 |
| Return Type: | Slot |
The item an entity is holding in their main or off hand.
Examples:
player's tool is tagged with minecraft tag "pickaxes"
player's off hand tool is a shield
set tool of all players to a diamond sword
set offhand tool of target entity to a bow
player's off hand tool is a shield
set tool of all players to a diamond sword
set offhand tool of target entity to a bow
| Patterns: | |
| Since: | 2.7 |
| Return Type: |
The total experience, in points, of players or experience orbs.
Adding to a player's experience will trigger Mending, but setting their experience will not.
Adding to a player's experience will trigger Mending, but setting their experience will not.
Examples:
set total experience of player to 100
add 100 to player's experience
if player's total experience is greater than 100:
set player's total experience to 0
give player 1 diamond
add 100 to player's experience
if player's total experience is greater than 100:
set player's total experience to 0
give player 1 diamond
| Patterns: |
|
| Since: | 2.8.0 |
| Return Type: | Transform Reason |
The transform reason within an entity entity transform event.
Examples:
on entity transform:
transform reason is infection, drowned or frozen
transform reason is infection, drowned or frozen
| Patterns: | |
| Since: | 2.10 |
| Return Type: | Object |
Transforms (or 'maps') a list's values using a given expression. This is akin to looping over the list and getting a modified version of each value.
If the given expression returns a single value, the indices of the list will not change. If the expression returns multiple values, then then indices will be reset as a single index cannot contain multiple values.
If the given expression returns a single value, the indices of the list will not change. If the expression returns multiple values, then then indices will be reset as a single index cannot contain multiple values.
Examples:
set {_a::*} to (1, 2, and 3) transformed using (input * 2 - 1, input * 2) # {_a::*} is now 1, 2, 3, 4, 5, and 6
# get a list of the sizes of all clans without manually looping set {_clan-sizes::*} to keyed {clans::*} transformed using [{clans::%input index%::size}] # using the 'keyed' expression retains the indices of the clans list
# get a list of the sizes of all clans without manually looping set {_clan-sizes::*} to keyed {clans::*} transformed using [{clans::%input index%::size}] # using the 'keyed' expression retains the indices of the clans list
| Patterns: |
|
| Since: | 1.4, 2.5.2 (potion effect), 2.7 (block datas), 2.10 (enchantment type) |
| Return Type: | Object |
Type of a block, item, entity, inventory, potion effect or enchantment type.
Types of items, blocks and block datas are item types similar to them but have amounts
of one, no display names and, on Minecraft 1.13 and newer versions, are undamaged.
Types of entities and inventories are entity types and inventory types known to Skript.
Types of potion effects are potion effect types.
Types of enchantment types are enchantments.
Types of items, blocks and block datas are item types similar to them but have amounts
of one, no display names and, on Minecraft 1.13 and newer versions, are undamaged.
Types of entities and inventories are entity types and inventory types known to Skript.
Types of potion effects are potion effect types.
Types of enchantment types are enchantments.
Examples:
on rightclick on an entity:
message "This is a %type of clicked entity%!"
message "This is a %type of clicked entity%!"
| Patterns: |
|
| Since: | 2.1.2, 2.2 (offline players' uuids), 2.2-dev24 (other entities' uuids) |
| Return Type: | UUID |
The UUID of a player, entity or world.
Examples:
# prevents people from joining the server if they use the name of a player
# who has played on this server at least once since this script has been added
on login:
if {uuid::%name of player%} exists:
{uuid::%name of player%} is not uuid of player
kick player due to "Someone with your name has played on this server before"
else:
set {uuid::%name of player%} to uuid of player
command /what-is-my-uuid:
trigger:
set {_uuid} to uuid of player
send "Your UUID is '%string within {_uuid}%'"
# who has played on this server at least once since this script has been added
on login:
if {uuid::%name of player%} exists:
{uuid::%name of player%} is not uuid of player
kick player due to "Someone with your name has played on this server before"
else:
set {uuid::%name of player%} to uuid of player
command /what-is-my-uuid:
trigger:
set {_uuid} to uuid of player
send "Your UUID is '%string within {_uuid}%'"
| Patterns: |
|
| Since: | 2.2-dev13b, 2.9.0 (breakable) |
| Return Type: | Item Type |
Creates breakable or unbreakable copies of given items.
Examples:
set {_item} to unbreakable iron sword
give breakable {_weapon} to all players
give breakable {_weapon} to all players
| Patterns: |
|
| Since: | 2.10 |
| Usable in events: | Unleash |
| Return Type: | Unleash Reason |
The unleash reason in an unleash event.
Examples:
if the unleash reason is distance:
broadcast "The leash was snapped in half."
broadcast "The leash was snapped in half."
| Patterns: |
|
| Since: | 2.10 (Nodes), 2.10 (Any) |
| Return Type: | Object |
Returns the value of something that has a value, e.g. a node in a config.
The value is automatically converted to the specified type (e.g. text, number) where possible.
The value is automatically converted to the specified type (e.g. text, number) where possible.
Examples:
set {_node} to node "language" in the skript config broadcast the text value of {_node}
set {_node} to node "update check interval" in the skript config broadcast text value of {_node} # text value of {_node} = "12 hours" (text) wait for {_node}'s timespan value # timespan value of {_node} = 12 hours (duration)
set {_node} to node "update check interval" in the skript config broadcast text value of {_node} # text value of {_node} = "12 hours" (text) wait for {_node}'s timespan value # timespan value of {_node} = 12 hours (duration)
| Patterns: | |
| Since: | 2.7 |
| Return Type: | Object |
Gets the value within objects. Usually used with variables to get the value they store rather than the variable itself, or with lists to get the values of a type.
Examples:
set {_entity} to a random entity out of all entities delete entity within {_entity} # This deletes the entity itself and not the value stored in the variable
set {_list::*} to "something", 10, "test" and a zombie broadcast the strings within {_list::*} # "something", "test"
set {_list::*} to "something", 10, "test" and a zombie broadcast the strings within {_list::*} # "something", "test"
| Patterns: |
|
| Since: | 2.2-dev28, 2.10 (quaternions) |
| Return Type: | Number |
Gets or changes the W, X, Y or Z component of vectors/quaternions.
You cannot use the W component with vectors; it is for quaternions only.
You cannot use the W component with vectors; it is for quaternions only.
Examples:
set {_v} to vector 1, 2, 3
send "%x of {_v}%, %y of {_v}%, %z of {_v}%"
add 1 to x of {_v}
add 2 to y of {_v}
add 3 to z of {_v}
send "%x of {_v}%, %y of {_v}%, %z of {_v}%"
set x component of {_v} to 1
set y component of {_v} to 2
set z component of {_v} to 3
send "%x component of {_v}%, %y component of {_v}%, %z component of {_v}%"
send "%x of {_v}%, %y of {_v}%, %z of {_v}%"
add 1 to x of {_v}
add 2 to y of {_v}
add 3 to z of {_v}
send "%x of {_v}%, %y of {_v}%, %z of {_v}%"
set x component of {_v} to 1
set y component of {_v} to 2
set z component of {_v} to 3
send "%x component of {_v}%, %y component of {_v}%, %z component of {_v}%"
| Patterns: | |
| Since: | 2.2-dev28 |
| Return Type: | Location |
Creates a location from a vector in a world.
Examples:
set {_loc} to {_v} to location in world "world"
set {_loc} to {_v} to location in world "world" with yaw 45 and pitch 90
set {_loc} to location of {_v} in "world" with yaw 45 and pitch 90
set {_loc} to {_v} to location in world "world" with yaw 45 and pitch 90
set {_loc} to location of {_v} in "world" with yaw 45 and pitch 90
| Patterns: |
|
| Since: | 2.8.0 |
| Return Type: | Vector |
Creates vectors from given directions.
Relative directions are relative to the origin, (0, 0, 0). Therefore, the vector from the direction 'forwards' is (0, 0, 1).
Relative directions are relative to the origin, (0, 0, 0). Therefore, the vector from the direction 'forwards' is (0, 0, 1).
Examples:
set {_v} to vector from direction upwards
set {_v} to vector in direction of player
set {_v} to vector in horizontal direction of player
set {_v} to vector from facing of player
set {_v::*} to vectors from north, south, east, and west
set {_v} to vector in direction of player
set {_v} to vector in horizontal direction of player
set {_v} to vector from facing of player
set {_v::*} to vectors from north, south, east, and west
| Patterns: | |
| Since: | 2.2-dev28 |
| Return Type: | Vector |
Forms a 'cylindrical shaped' vector using yaw to manipulate the current point.
Examples:
loop 360 times:
set {_v} to cylindrical vector radius 1, yaw loop-value, height 2
set {_v} to cylindrical vector radius 1, yaw 90, height 2
set {_v} to cylindrical vector radius 1, yaw loop-value, height 2
set {_v} to cylindrical vector radius 1, yaw 90, height 2
| Patterns: | |
| Since: | 2.2-dev28 |
| Return Type: | Number |
Gets or sets the length of a vector.
Examples:
send "%standard length of vector 1, 2, 3%"
set {_v} to vector 1, 2, 3
set standard length of {_v} to 2
send "%standard length of {_v}%"
set {_v} to vector 1, 2, 3
set standard length of {_v} to 2
send "%standard length of {_v}%"
| Patterns: |
|
| Since: | 2.2-dev28, 2.7 (signed components) |
| Return Type: | Vector |
Creates a random unit vector.
Examples:
set {_v} to a random vector
| Patterns: | |
| Since: | 2.2-dev28 |
| Return Type: | Vector |
Forms a 'spherical shaped' vector using yaw and pitch to manipulate the current point.
Examples:
loop 360 times:
set {_v} to spherical vector radius 1, yaw loop-value, pitch loop-value
set {_v} to spherical vector radius 1, yaw 45, pitch 90
set {_v} to spherical vector radius 1, yaw loop-value, pitch loop-value
set {_v} to spherical vector radius 1, yaw 45, pitch 90
| Patterns: |
|
| Since: | 2.0 |
| Return Type: | Text |
The version of Bukkit, Minecraft or Skript respectively.
Examples:
message "This server is running Minecraft %minecraft version% on Bukkit %bukkit version%"
message "This server is powered by Skript %skript version%"
message "This server is powered by Skript %skript version%"
| Patterns: |
|
| Since: | 2.3 |
| Usable in events: | Server List Ping |
| Requirements: | Paper 1.12.2+ |
| Return Type: | Text |
The text to show if the protocol version of the server doesn't match with protocol version of the client. You can check the protocol version expression for more information about this.
This can only be set in a server list ping event.
This can only be set in a server list ping event.
Examples:
on server list ping:
set the protocol version to 0 # 13w41a (1.7), so it will show the version string always
set the version string to "<light green>Version: <orange>%minecraft version%"
set the protocol version to 0 # 13w41a (1.7), so it will show the version string always
set the version string to "<light green>Version: <orange>%minecraft version%"
| Patterns: | |
| Since: | 2.4, 2.11 (worlds) |
| Requirements: | Paper (change for players), Paper 1.21+ (change for worlds) |
| Return Type: |
The view distance of a world or a player.
The view distance of a player is the distance in chunks sent by the server to the player. This has nothing to do with client side view distance settings.
View distance is capped between 2 to 32 chunks.
Paper is required to change the view distance for both worlds and players.
The view distance of a player is the distance in chunks sent by the server to the player. This has nothing to do with client side view distance settings.
View distance is capped between 2 to 32 chunks.
Paper is required to change the view distance for both worlds and players.
Examples:
set view distance of player to 10
add 50 to the view distance of world "world"
reset the view distance of player
clear the view distance of world "world"
add 50 to the view distance of world "world"
reset the view distance of player
clear the view distance of world "world"
| Patterns: | |
| Since: | 2.5 |
| Requirements: | 1.13.2+ |
| Return Type: |
The view distance of the client. Can not be changed. This differs from the server side view distance of player as this will retrieve the view distance the player has set on their client.
Examples:
set {_clientView} to the client view distance of player
set view distance of player to client view distance of player
set view distance of player to client view distance of player
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Number |
Represents the level/experience of a villager.
The level will determine which trades are available to players (value between 1 and 5, defaults to 1).
When a villager's level is 1, they may lose their profession if they don't have a workstation.
Experience works along with the leveling system, determining which level the villager will move to.
Experience must be greater than or equal to 0.
Learn more about villager levels on Minecraft Wiki
The level will determine which trades are available to players (value between 1 and 5, defaults to 1).
When a villager's level is 1, they may lose their profession if they don't have a workstation.
Experience works along with the leveling system, determining which level the villager will move to.
Experience must be greater than or equal to 0.
Learn more about villager levels on Minecraft Wiki
Examples:
set {_level} to villager level of {_villager}
set villager level of last spawned villager to 2
add 1 to villager level of target entity
remove 1 from villager level of event-entity
reset villager level of event-entity
set villager experience of last spawned entity to 100
set villager level of last spawned villager to 2
add 1 to villager level of target entity
remove 1 from villager level of event-entity
reset villager level of event-entity
set villager experience of last spawned entity to 100
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Villager Profession |
Represents the profession of a villager/zombie villager.
Examples:
set {_p} to villager profession of event-entity
villager profession of event-entity = nitwit profession
set villager profession of {_villager} to librarian profession
delete villager profession of event-entity
villager profession of event-entity = nitwit profession
set villager profession of {_villager} to librarian profession
delete villager profession of event-entity
| Patterns: |
|
| Since: | 2.10 |
| Return Type: | Villager Type |
Represents the type of a villager/zombie villager. This usually represents the biome the villager is from.
Examples:
set {_type} to villager type of {_villager}
villager type of {_villager} = plains
set villager type of event-entity to plains
villager type of {_villager} = plains
set villager type of event-entity to plains
| Patterns: |
|
| Since: | 2.11 |
| Return Type: |
The anger level a warden feels towards an entity.
A warden can be angry towards multiple entities with different anger levels.
If an entity reaches an anger level of 80+, the warden will pursue it.
Anger level maxes out at 150.
A warden can be angry towards multiple entities with different anger levels.
If an entity reaches an anger level of 80+, the warden will pursue it.
Anger level maxes out at 150.
Examples:
set the anger level of last spawned warden towards player to 20
clear the last spawned warden's anger level towards player
clear the last spawned warden's anger level towards player
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Living Entity |
The entity a warden is most angry at.
A warden can be angry towards multiple entities with different anger levels.
A warden can be angry towards multiple entities with different anger levels.
Examples:
if the most angered entity of last spawned warden is not player:
set the most angered entity of last spawned warden to player
set the most angered entity of last spawned warden to player
| Patterns: |
|
| Since: | 2.11 |
| Return Type: |
The warning distance of a world border. The player's screen will be tinted red when they are within this distance of the border.
Players only see a red tint when approaching a world's worldborder and the warning distance has to be an integer greater than or equal to 0.
Players only see a red tint when approaching a world's worldborder and the warning distance has to be an integer greater than or equal to 0.
Examples:
set world border warning distance of {_worldborder} to 1
| Patterns: |
|
| Since: | 2.11 |
| Return Type: | Timespan |
The warning time of a world border. If the border is shrinking, the player's screen will be tinted red once the border will catch the player within this time period.
Examples:
set world border warning time of {_worldborder} to 1 second
| Patterns: | |
| Since: | 1.0 |
| Usable in events: | weather change |
| Return Type: | Weather Type |
The weather of a world or player.
Clearing or resetting the weather of a player will make the player's weather match the weather of the world.
Clearing or resetting the weather of a world will make the weather clear.
Clearing or resetting the weather of a player will make the player's weather match the weather of the world.
Clearing or resetting the weather of a world will make the weather clear.
Examples:
set weather to clear
weather in "world" is rainy
reset custom weather of player
set weather of player to clear
weather in "world" is rainy
reset custom weather of player
set weather of player to clear
| Patterns: |
|
| Since: | 2.9.0 |
| Return Type: | Boolean |
A shorthand for returning the result of a condition (true or false). This is functionally identical to using `true if else false`.
Examples:
set {fly} to whether player can fly
broadcast "Flying: %whether player is flying%"
broadcast "Flying: %whether player is flying%"
| Patterns: |
|
| Since: | 2.5.2, 2.9.0 (delete) |
| Return Type: | Offline Player |
An expression for obtaining and modifying the server's whitelist.
Players may be added and removed from the whitelist.
The whitelist can be enabled or disabled by setting the whitelist to true or false respectively.
Players may be added and removed from the whitelist.
The whitelist can be enabled or disabled by setting the whitelist to true or false respectively.
Examples:
set the whitelist to false
add all players to whitelist
reset the whitelist
add all players to whitelist
reset the whitelist
| Patterns: | |
| Since: | 2.9.0 |
| Requirements: | Spigot 1.20.5+ |
| Return Type: | Item Type |
Creates a copy of an item with (or without) fire resistance.
Examples:
set {_x} to diamond sword with fire resistance
equip player with netherite helmet without fire resistance
drop fire resistant stone at player
equip player with netherite helmet without fire resistance
drop fire resistant stone at player
| Patterns: | |
| Since: | 1.0 |
| Return Type: | World |
The world the event occurred in.
Examples:
world is "world_nether"
teleport the player to the world's spawn
set the weather in the player's world to rain
set {_world} to world of event-chunk
teleport the player to the world's spawn
set the weather in the player's world to rain
set {_world} to world of event-chunk
| Patterns: | |
| Since: | 2.11 |
| Return Type: | World Border |
Get the border of a world or a player.
A player's world border is not persistent. Restarts, quitting, death or changing worlds will reset the border.
A player's world border is not persistent. Restarts, quitting, death or changing worlds will reset the border.
Examples:
set {_border} to world border of player's world
| Patterns: | |
| Since: | 2.7 |
| Return Type: | World Environment |
The environment of a world
Examples:
if environment of player's world is nether:
apply fire resistance to player for 10 minutes
apply fire resistance to player for 10 minutes
| Patterns: |
|
| Since: | 1.0 |
| Return Type: | World |
All worlds of the server, useful for looping.
Examples:
loop all worlds:
broadcast "You're in %loop-world%" to loop-world
broadcast "You're in %loop-world%" to loop-world
| Patterns: |
|
| Since: | 1.4.6 |
| Return Type: |
Integers between 1 and X, used in loops to loop X times.
Examples:
loop 20 times:
broadcast "%21 - loop-number% seconds left.."
wait 1 second
broadcast "%21 - loop-number% seconds left.."
wait 1 second
| Patterns: |
|
| Since: | 1.2 |
| Return Type: | Object |
An expression to be able to use a certain amount of items where the amount can be any expression. Please note that this expression is not stable and might be replaced in the future.
Examples:
give level of player of iron pickaxes to the player
| Patterns: | |
| Since: | 2.0, 2.2-dev28 (vector yaw/pitch), 2.9.0 (entity changers) |
| Requirements: | Paper 1.19+ (player changers) |
| Return Type: |
The yaw or pitch of a location or vector.
A yaw of 0 or 360 represents the positive z direction. Adding a positive number to the yaw of a player will rotate it clockwise.
A pitch of 90 represents the negative y direction, or downward facing. A pitch of -90 represents upward facing. Adding a positive number to the pitch will rotate the direction downwards.
Only Paper 1.19+ users may directly change the yaw/pitch of players.
A yaw of 0 or 360 represents the positive z direction. Adding a positive number to the yaw of a player will rotate it clockwise.
A pitch of 90 represents the negative y direction, or downward facing. A pitch of -90 represents upward facing. Adding a positive number to the pitch will rotate the direction downwards.
Only Paper 1.19+ users may directly change the yaw/pitch of players.
Examples:
log "%player%: %location of player%, %player's yaw%, %player's pitch%" to "playerlocs.log"
set {_yaw} to yaw of player
set {_p} to pitch of target entity
set pitch of player to -90 # Makes the player look upwards, Paper 1.19+ only
add 180 to yaw of target of player # Makes the target look behind themselves
set {_yaw} to yaw of player
set {_p} to pitch of target entity
set pitch of player to -90 # Makes the player look upwards, Paper 1.19+ only
add 180 to yaw of target of player # Makes the target look behind themselves